Limiting current in a collisional crossed-field gap

Crossed-field devices are often used in pulsed power and high-power microwave applications. Previous studies derived closed-form solutions for the limiting current of a vacuum crossed-field system, corresponding to the maximum permissible current for laminar flow, below and above the Hull cutoff BH for magnetic insulation. We extend these studies by introducing collision frequency into the electron force law as a friction term to derive the limiting current in a collisional crossed-field gap. The resulting solution recovers the vacuum crossed-field case in the limit of no collisions and the collisional space-charge limited current with general initial velocity for magnetic field B -> 0. In the limit of infinite collisions, we obtain a crossed-field equivalent to the Mott-Gurney law for the maximum current permissible in a collisional, nonmagnetic diode. When the collision frequency nu is less than the electron cyclotron frequency Omega, increasing initial velocity makes the critical current nonmonotonic with increasing nu with the critical current higher at B=B-H for nu=Omega. As for a misaligned crossed-field gap where a component of the magnetic field was introduced parallel to the electric field across the gap, magnetic insulation is eliminated and the discontinuity at B=B-H for limiting current observed in a vacuum crossed-field gap vanishes. As B ->infinity, the limiting current approaches a constant that depends on the initial velocity and the collision frequency.