Sustainable Biobased Hydrogel as an Alternative Air-Entrainment Agent in Cement-Based Materials

被引:0
|
作者
Jalal, Asif [1 ]
Kiran, Ravi [2 ]
机构
[1] North Dakota State Univ, Dept Civil & Environm Engn, Fargo, ND 58105 USA
[2] Arizona State Univ, Sch Sustainable Engn & Built Environm, Tempe, AZ 85281 USA
基金
美国国家科学基金会;
关键词
Concrete durability; Cementitious void structure; Superabsorbent polymers; Cornstarch and internal curing; FREEZE-THAW RESISTANCE; FROST-RESISTANCE; SUPERABSORBENT POLYMERS; CORN STARCH; RHEOLOGICAL PROPERTIES; CELLULAR CONCRETE; FRESH CONCRETE; VOID SYSTEM; PERFORMANCE; STRENGTH;
D O I
10.1061/JMCEE7.MTENG-17763
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study synthesized a biobased hydrogel from local and renewable raw materials to improve the freeze-thaw resistance of hardened cementitious matrices. A biobased hydrogel was produced by thermal gelatinization process with different cornstarch contents ranging from 1% to 3% of mortar mixing water. The effectiveness of cornstarch hydrogel was gauged by comparing its void structure with those of two commercially available super absorbent polymers (used at 0.2% of cement weight) and an air-entraining agent (0.49% of total mortar weight). The resulting void structures were analyzed by evaluating porosity, void-size distribution, spacing factor, and shape of voids using microcomputed tomography scanning with a sensitivity of 10 mu m. The 3% cornstarch hydrogel produced a robust void structure with high porosity and relatively large number of smaller voids. The high porosity was achieved without a significant reduction in compression strength. Furthermore, chemical analysis revealed that the 3% cornstarch hydrogel had a positive influence on the hydration of cement compared with the commercial air-entrainment agent. Overall, the 3% cornstarch hydrogel can be a sustainable biodegradable replacement for traditional and commercial surfactants for air entrainment, and has an additional internal curing advantage.
引用
收藏
页数:15
相关论文
共 50 条
  • [21] Air-void characteristics in highly flowable cement-based materials
    Fantous, Toufik
    Yahia, Ammar
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2020, 235
  • [22] Effect of Inorganic Surface Treatment on Air Permeability of Cement-Based Materials
    Pan, Xiaoying
    Shi, Caijun
    Jia, Lufeng
    Zhang, Jiake
    Wu, Linmei
    [J]. JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2016, 28 (03)
  • [23] Air-entrainment as an alternative to polypropylene fibers and its effect on the compressive strength of concrete at high temperatures
    Holan, J.
    Novak, J.
    Stefan, Radek
    [J]. FIBRE CONCRETE 2019, 2019, 596
  • [24] COMPUTATIONAL MATERIALS SCIENCE OF CEMENT-BASED MATERIALS
    GARBOCZI, EJ
    [J]. MATERIALS AND STRUCTURES, 1993, 26 (158): : 191 - 195
  • [25] Investigating the feasibility of using waste eggshells in cement-based materials for sustainable construction
    Khan, Kaffayatullah
    Ahmad, Waqas
    Amin, Muhammad Nasir
    Deifalla, Ahmed Farouk
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 : 4059 - 4074
  • [26] Utilization of waste from alumina industry to produce sustainable cement-based materials
    Luo, Shuqiong
    Liu, Min
    Yang, Lei
    Chang, Jindan
    Yang, Wenpeng
    Yan, Xuyan
    Yu, Huiling
    Shen, Yongxuan
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2019, 229
  • [27] Utilization of desert sand in the production of sustainable cement-based materials: A critical review
    Zhang, Minghu
    Zhu, Xuezhen
    Shi, Jinyan
    Liu, Baoju
    He, Zhihai
    Liang, Chaofeng
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2022, 327
  • [28] Computational materials science of cement-based materials
    Garboczi, E.J.
    [J]. Materiaux et constructions, 1993, 26 (158): : 191 - 195
  • [29] COMPUTATIONAL MATERIALS SCIENCE OF CEMENT-BASED MATERIALS
    GARBOCZI, EJ
    BENTZ, DP
    [J]. MRS BULLETIN, 1993, 18 (03) : 50 - 54
  • [30] Enhanced Thermoelectric Efficiency of Cement-Based Materials with Cuprous Oxide for Sustainable Buildings
    Ji, Tao
    Zhang, Shiping
    He, Yan
    Zhang, Xiong
    Li, Weihua
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022