Influence of Printing Pattern on Bearing Capacity of 3D Printed Concrete Hollow Structures

被引：0
|
作者：
Chen, Zhaohui [1 ,2 ]
Wang, Zhenyue [1 ]
Liao, Minmao [1 ,2 ]
Sun, Junbo [3 ]
Sun, Xiao [1 ]
机构：
[1] Chongqing Univ, Sch Civil Engn, Chongqing 400045, Peoples R China
[2] Chongqing Univ, China Minist Educ, Key Lab New Technol Construct Cities Mt Area, Chongqing 400045, Peoples R China
[3] Chongqing Univ Liyang, Inst Smart City, Liyang 213300, Peoples R China
来源：
CONSTRUCTION 3D PRINTING, 4-IC3DCP CONFERENCE 2023 | 2024年
关键词：
3D printed concrete; hollow structure; cross-sectional pattern; load-bearing capacity;
D O I：
10.1007/978-3-031-64269-2_4
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
In this study, four specimens with two cross-section patterns, the W-shape and Y-shape, are printed by using two nozzle sizes to study the effects of the printed patterns and nozzle size on the mechanics properties of 3D Printed Concrete (3DPC) structures. The four-point loading tests are conducted and the Digital Image Correlation (DIC) analysis technology is used. The results showed that the load capacity of the Y-shaped specimens is about 10% higher than that of the W-shaped specimens, and the specimens printed with a smaller nozzle have a load capacity of 15-20% higher. The DIC analysis reveals that the failure modes of the W-shaped and Y-shaped specimens are closely related to the strength of the mid-span nodes.
引用
收藏
页码：26 / 31
页数：6
相关论文
共 50 条
  • [21] Mechanical behaviors of 3D printed lightweight concrete structure with hollow section
    Wang, Li
    Jiang, Hailong
    Li, Zhijian
    Ma, Guowei
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2020, 20 (01)
  • [22] Influence of the printing direction and age on the mechanical properties of 3D printed concrete (vol 54, 73, 2021)
    Zahabizadeh, Behzad
    Pereira, Joao
    Goncalves, Claudia
    Pereira, Eduardo N. B.
    Cunha, Vitor M. C. F.
    MATERIALS AND STRUCTURES, 2023, 56 (01)
  • [23] 3D concrete printing modelling of thin-walled structures
    Vuong Nguyen-Van
    Nguyen-Xuan, H.
    Panda, Biranchi
    Phuong Tran
    STRUCTURES, 2022, 39 : 496 - 511
  • [24] 3D printing concrete structures: State of the art, challenges, and opportunities
    Liu, Dawei
    Zhang, Zhigang
    Zhang, Xiaoyue
    Chen, Zhaohui
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 405
  • [25] 3D printed temperature-sensing repairs for concrete structures
    Vlachakis, Christos
    Perry, Marcus
    Biondi, Lorena
    McAlorum, Jack
    ADDITIVE MANUFACTURING, 2020, 34
  • [26] Optimising 3D Printed Concrete Structures Using Topology Optimisation
    Martens, Pascal
    Mathot, Maarten
    Bos, Freek
    Coenders, Jeroen
    HIGH TECH CONCRETE: WHERE TECHNOLOGY AND ENGINEERING MEET, 2018, : 301 - 309
  • [27] Experimental Study on Bearing Capacity of 3D Printing Reinforced Masonry Wall
    Ge J.
    Bai J.
    Yang Y.
    Tian W.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2020, 23 (02): : 414 - 420
  • [28] Radiation pattern design by using 3D printed Bragg structures
    Pinto Ribeiro, Jessica Abranches
    Goncalves, Eder
    Justino Ribeiro, Jose Antonio
    Beltran-Mejia, Felipe
    PROCEEDINGS OF THE 2019 INTERNATIONAL CONFERENCE ON ELECTROMAGNETICS IN ADVANCED APPLICATIONS (ICEAA), 2019, : 1287 - 1290
  • [29] Effect of printing parameters on inter-filament voids, bonding, and geometrical deviation in concrete 3D printed structures
    Salaimanimagudam, M. P.
    Jayaprakash, J.
    MATERIALS LETTERS, 2023, 349
  • [30] 3D Printing Concrete with Reinforcement
    Bos, Freek P.
    Ahmed, Zeeshan Y.
    Wolfs, Rob J. M.
    Salet, Theo A. M.
    HIGH TECH CONCRETE: WHERE TECHNOLOGY AND ENGINEERING MEET, 2018, : 2484 - 2493
12345