High-sensitive glucose sensor based on tilted fiber Bragg gratings

In this paper, we proposed a high-sensitive glucose sensor using the tilted fiber Bragg gratings (TFBGs). The TFBGs with different tilt angle has been fabricated by phase mask scanning method with an argon ion doublefrequency 244 nm laser. As tilt angle increases, the bandwidth of the cladding mode excited by TFBGs gradually expands and cladding mode region shifts towards shorter wavelengths. The higher-order cladding modes appeared at the shorter wavelength side demonstrate a larger separation in the spectrum. TFBGs with different tilt angles for glucose concentration measurement have been investigated experimentally. When the concentration of glucose solution increases, the surrounding refractive index changing make the cut-off mode resonance shift to a longer wavelength. In addition, the tilt angle of TFBGs does affect the glucose sensitivity, that the larger tilt angle is, the higher sensitivity could achieve. In this work, a maximum glucose sensitivity of 80.91 pm/(mg/ ml) could be obtained for TFBGs with tilt angle of 10 degrees . The proposed TFBGs with superiorities of high glucose sensitivity and wider detection range, makes it potential for glucose detection in the field of chemical and biomedical sensing.