Demonstration and optimization of coherent Doppler wind LiDAR with low sampling resolution

A low sampling resolution scheme for coherent Doppler wind LiDAR (CDWL) is proposed. The CDWL offers advantages in precision and detection resolution but suffers from the requirement of high-speed data acquisition (DAQ) with high sampling resolution, such as 12- or 14-bit, which leads to an increase of the computational complexity and the system cost. The use of a DAQ system with lower sampling resolution can provide a solution to mitigate this problem. The feasibility of the proposed scheme is validated by simulations and experiments. The detection performance can be greatly affected by the quantization interval selected during sampling. It is shown that the optimal quantization interval exists and only depends on the carrier-to-noise ratio (CNR), and the optimal quantization intervals of several sampling resolutions are given at different CNRs. With the given optimal quantization configuration, the low sampling resolution data can be used for reliable wind field measurements. For long-distance detection with a CNR lower than - 13 dB, the CNR deterioration of 1-bit, 2-bit, 3-bit, and 4-bit signals can be as low as 2, 0.5, 0.2, and 0.1 dB. (c) 2024 Optica Publishing Group. All rights, including for text and data mining (TDM), Artificial Intelligence (AI) training, and similar technologies, are reserved.