Influence of Defects and Microstructure on the Thermal Expansion Behavior and the Mechanical Properties of Additively Manufactured Fe-36Ni

Laser-based powder bed fusion of metals (PBF-LB/M) is a widely used additive manufacturing process characterized by a high degree of design freedom. As a result, near fully dense complex components can be produced in near-net shape by PBF-LB/M. Recently, the PBF-LB/M process was found to be a promising candidate to overcome challenges related to conventional machining of the Fe64Ni36 Invar alloy being well known for a low coefficient of thermal expansion (CTE). In this context, a correlation between process-induced porosity and the CTE was presumed in several studies. Therefore, the present study investigates whether the unique thermal properties of the PBF-LB/M-processed Fe64Ni36 Invar alloy can be tailored by the selective integration of defects. For this purpose, a full-factorial experimental design, representing by far the largest processing window in the literature, was considered, correlating the thermal expansion properties with porosity and hardness. Furthermore, the microstructure and mechanical properties were investigated by scanning electron microscopy and quasi-static tensile tests. Results by means of statistical analysis reveal that a systematic correlation between porosity and CTE properties could not be determined. However, by using specific process parameter combinations, the microstructure changed from a fine-grained fan-like structure to a coarse columnar structure.