H2O2-assisted photo-electrocatalytic and photocatalytic degradation of methyl violet by CuO-modified TiO2 nanotube arrays

Photoelectrocatalytic degradation is an environmental friendly and efficient technique providing solutions for the dire issue of water pollution. TiO2 nanotubes are widely used as the photocatalyst but its efficiency is restricted by the wide band gap. This study deals with the fabrication of CuO-modified TiO2 nanotubes by electrochemical anodization following the hydrothermal method to enhance the photocatalytic degradation. Optical studies revealed a reduction in the bandgap (2.12 eV) of CuO-modified TiO2 nanotubes, which plays an important role in increasing the photocatalytic activity. The effect of CuO loading on TiO2 nanotubes in photocatalytic degradation as well as the effect of bias and H2O2 on photo-electrocatalytic degradation were studied. In photocatalytic degradation, 0.05 M CuO-TiO2 photocatalyst produced a maximum degradation of 49.5% in 8 h. Compared with the pristine TiO2 nanotubes, the photodegradation of CuO-loaded TiO2 nanotubes increased by 16 %. Furthermore, when an external bias was applied, the photodegradation efficiency increased by 36 %. In addition of H2O2 to the PEC system, 0.05 CuO-TiO2 photocatalyst produced 100 % degradation of methyl violet in 2.5 h. Reusability studies showed that the photocatalysts are stable and can therefore be used for practical applications such as photocatalytic degradation and photoelectrochemical degradation of methyl violet.