A novel photoelectrochemical based water splitting and uric acid biosensing using PLD grown In2Se3 thin films

By altering the deposition pressure during the film growth process using the pulsed laser deposition (PLD) technology, indium selenide (In2Se3) thin films have been optimized to produce their distinct phases. The phase purity, optical and morphological studies were carried out using XRD, Raman spectroscopy, XPS, UV-visible spectroscopy, AFM and FESEM measurements. A high absorption in the visible region is observed for In2Se3 thin films with suitable band edges for hydrogen evolution. Photoelectrochemical (PEC) activity for In2Se3 photoelectrodes having various phases was analyzed based on CV and I-t response. A good charge transport characteristics were observed using the EIS measurements on PLD grown In2Se3 thin films. The Mott-Schottky analysis for the charge carrier density, flat band potential, and depletion layer width was performed for the deposition pressure dependent phase formation and high performance for PEC water splitting conversion efficiency of 0.48 %, 0.57 % and 0.98 % corresponding to alpha-In2Se3, beta-In2Se3 and gamma-In2Se3 were observed, respectively. The as prepared In2Se3 thin films were employed for the detection of Uric Acid (UA) using the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry. The high sensitivity (0.38 mA/mM), selectivity and repeatability of the prepared biosensor demonstrates In2Se3 as potential candidate for the PEC based water splitting and biosensing application without the presence of an external mediator and can work in the selfpowered mode.