Cosolvent-assisted construction of high-performance reverse osmosis membranes with multilayer nanovoid structures: Effect of amides in aqueous phase

The cosolvent-assisted interfacial polymerization (CAIP) has garnered significant attention due to its capacity to easily and effectively modify the performance of polyamide (PA) reverse osmosis (RO) membranes. To gain deeper understanding of the mechanism of a specific type of cosolvents on the IP reaction, namely N,Ndimethylformamide (DMF), N,N-dimethylacetamide (DMAc), and N,N-dimethylpropionamide (DMPr) were used as aqueous-phase cosolvents to systematically investigate their effects on the membrane structures and properties under different conditions. Amide cosolvents in the aqueous phase facilitated the diffusion of the amine monomer and the formation of nanovoids within the PA layer as the C-chain length of amides increased. When 1,2-dichloroethane was also included in the organic phase, the extent of the two-phase miscible zone was further increased with its assistance, which contributed to generating the larger nanovoids within the layer, thicker PA layer and extensive exterior PA layers, as well as significantly enhancing the water permeability and selectivity of membranes. Importantly, this study successfully prepared high-performance RO membranes with multilayer nanovoid structures in situ by introducing cosolvents in the IP reaction with permeability up to 2.26 L & sdot;m- 2 & sdot;h- 1 & sdot;bar- 1, providing theoretical and experimental bases for further enrichment of CAIP.