Experimental and simulation study on coal-fired power generation coupling with fluidized bed biomass gasification

Positive-pressure fluidized bed technology utilizes the pressure generated by biomass gasification to facilitate further combustion within the furnace. This technique addresses the safety risks associated with external pressure in fluidizing medium and high-temperature situations and reduces equipment investment and operating expenses. However, research on the effects of the positive-pressure process in fluidized beds on gasification coupled with coal-fired power generation systems is scarce. To fill this research gap, extensive experimentation and Aspen Plus simulation were conducted to investigate the impact of equivalence ratio (ER), gasification pressure, and gasification temperature on the gasification performance. A 660 MW coal-fired boiler model was established to reveal the coupling effect on flue gas temperature and thermal efficiency by gasification from a positive-pressure fluidized bed on the boiler, and its accuracy was proved by comparing the actual boiler design parameters. The power generation cost of the positive-pressure gasification coupled coal-fired power generation system is calculated with the established model. The results indicate that an increase in gasification pressure from 4000Pa to 8000Pa resulted in no significant change in the operating indicators of the boiler, with the tail gas temperature near 132 degrees C and a boiler thermal efficiency of 92.68 %. Gas yield, carbon conversion rate, and gasification efficiency were positively correlated with gasification temperature and ER. However, the heat value of combustible gas increased with the gasification temperature and decreased with an increase in ER. With the rise of the biomass gas blending ratio, the power generation cost of the unit gradually decreases. Respectively, the positive -pressure would lower the power generation costs of a 660 MW coal-fired boiler by 5.76 x 105$/ year. This study demonstrates that positive-pressure fluidized bed gasification may retain high gas yields and efficiency, significantly lowering equipment investment and operating expenses, as a very efficient energy-saving and carbon-reduction technique.