Development Trend of Nickel-Based Single Crystal Superalloys: Alloy Design Driven by New Research Technology

被引：0

作者：

Cui, Zhuang ^{[1
]}

Liu, Manping ^{[1
]}

Zeng, Ying ^{[2
]}

Ma, Hui ^{[1
]}

Sun, Shaochun ^{[1
]}

Zhao, Guoping ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China

[2] Southwest Jiaotong Univ, Sch Mat Sci & Engn, Chengdu 610031, Peoples R China

来源：

RARE METAL MATERIALS AND ENGINEERING | 2024年 / 53卷 / 08期

关键词：

single crystal superalloy; alloying; high-throughput; machine learning; atom probe tomograph; SITU NEUTRON-DIFFRACTION; CREEP-RUPTURE LIFE; ELEVATED-TEMPERATURE; CARBON ADDITIONS; GRAIN-BOUNDARY; PHASE-DIAGRAM; TCP PHASES; BEHAVIOR; MICROSTRUCTURE; FATIGUE;

D O I：

10.12442/j.issn.1002-185X.20230443

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Nickel-based single crystal superalloys are composed of various elements, each of which has a unique strengthening effect. It is difficult to realize the rapid development of new alloys by traditional alloying design methods such as "trial and error" and phase diagram calculation. The relationship between composition, organization, technology and properties can be quickly obtained by "material genome engineering", which greatly improves the research and development rate of materials and reduces the production cost. The development trend of alloying design of nickel-based single crystal superalloys was briefly described, including the application of new research technologies such as high throughput preparation and characterization technology and machine learning in alloying design. The ability of atom probe tomography (APT) to quantitatively study the content and distribution of elements in the microstructure of alloys was also expounded. It is expected that this paper can provide ideas for alloying design of nickel-based single crystal superalloys.

引用

页码：2375 / 2389

页数：15

共 138 条

[71] INTERMEDIATE PHASES IN TERNARY ALLOY SYSTEMS OF TRANSITION ELEMENTS
RIDEOUT, S
MANLY, WD
KAMEN, EL
LEMENT, BS
BECK, PA
[J]. JOURNAL OF METALS, 1951, 3 (10): : 872 - 876
[72] In situ determination of γ′ phase volume fraction and of relations between lattice parameters and precipitate morphology in Ni-based single crystal superalloy
Royer, A
Bastie, P
Veron, M
[J]. ACTA MATERIALIA, 1998, 46 (15) : 5357 - 5368
[73] Optimization of laser deposited Ni-based single crystal superalloys microstructure
Santos, Edson Costa
Kida, Katsuyuki
Carroll, Phil
Vilar, Rui
[J]. MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 1405 - +
[74] Traditional and non-traditional machining of nickel-based superalloys: A brief review
Satish, G. Jangali
Gaitonde, V. N.
Kulkarni, Vinayak N.
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1448 - 1454
[75] Physical metallurgy-guided machine learning and artificial intelligent design of ultrahigh-strength stainless steel
Shen, Chunguang
Wang, Chenchong
Wei, Xiaolu
Li, Yong
van der Zwaag, Sybrand
Xu, Wei
[J]. ACTA MATERIALIA, 2019, 179 : 201 - 214
[76] Shi ZX, 2023, RARE METAL MAT ENG, V52, P1977
[77] Sisi Xiang, 2019, Study of Secondary gamma' Precipitates and Carbides of a Second Generation Single Crystal Superalloy
[78] Segregation and η phase formation along stacking faults during creep at intermediate temperatures in a Ni-based superalloy
Smith, T. M.
Esser, B. D.
Antolin, N.
Viswanathan, G. B.
Hanlon, T.
Wessman, A.
Mourer, D.
Windl, W.
McComb, D. W.
Mills, M. J.
[J]. ACTA MATERIALIA, 2015, 100 : 19 - 31
[79] Influence of Ta/Al ratio on the microstructure and creep property of a Ru-containing Ni-based single-crystal superalloy
Song, Wei
Wang, Xinguang
Li, Jinguo
Meng, Jie
Yang, Yanhong
Liu, Jinlai
Liu, Jide
Zhou, Yizhou
Sun, Xiaofeng
[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 89 : 16 - 23
[80] Progress in Materials Genome Engineering in China
Su Yanjing
Fu Huadong
Bai Yang
Jiang Xue
Xie Jianxin
[J]. ACTA METALLURGICA SINICA, 2020, 56 (10) : 1313 - 1323

← 3 4 5 6 7 8 9 10 11 12 →