Actual Yield Stress in Ti49.3Ni50.7 (at.%) Alloy in the State As Received from the Manufacturer

被引：0

作者：

Zhapova, D. Yu. ^{[1
]}

Lotkov, A. I. ^{[1
]}

Grishkov, V. N. ^{[1
]}

Bobrov, D. I. ^{[1
]}

Gusarenko, A. A. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia

来源：

RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 08期

关键词：

yield stress; plastic strain; superelasticity effect; inelastic strain; SHAPE-MEMORY; DEFORMATION; TRANSFORMATION; BEHAVIOR;

D O I：

10.1007/s11182-024-03228-8

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The development of inelastic and plastic strains is studied for Ti49.3Ni50.7 (at.%) alloy samples with the structure of high-temperature B2 phase in the state as received from the manufacturer under torsion. It has been established that when the strain of the samples, specified by torsion, is equal to 10.6%, the value of the accumulated plastic strain is 0.35%. Therefore, the actual yield stress of the Ti49.3Ni50.7 (at.%) alloy samples is localized at the end of the pseudo-yield plateau on the stress-strain dependence rather than at the end of the strain hardening stage, as previously thought. The results presented in the work should be taken into account in the practical use of the alloy with this composition as products for technical and medical purposes that experience tensile, bending, and torsional deformations.

引用

页码：1157 / 1163

页数：7

共 39 条

[21] Microstructure of Ni-48 at.%Ti Alloy Prepared from Powder and by Conventional Metallurgy
Karlik, M.
Hausild, P.
Adamek, J.
Drahokoupil, J.
Novak, P.
Perriere, L.
ACTA PHYSICA POLONICA A, 2018, 134 (03) : 765 - 768
[22] Martensitic transformation from incommensurate state with nano-scale domain structure in a Ti-42Ni-8Fe (at.%) alloy under a compressive stress
Todai, Mitsuharu
Higaki, Akio
Fukuda, Takashi
Kakeshita, Tomoyuki
PHILOSOPHICAL MAGAZINE LETTERS, 2011, 91 (01) : 31 - 36
[23] Deformation behavior after stress-induced martensite transformation in a Ti-50.8 at.% Ni alloy
Wang, Xiebin
Verlinden, Bert
Van Humbeeck, Jan
ESOMAT 2015 - 10TH EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS, 2015, 33
[24] Stress-induced transformation behaviors at low temperatures in Ti-51.8Ni (at. %) shape memory alloy
Niitsu, K.
Omori, T.
Kainuma, R.
APPLIED PHYSICS LETTERS, 2013, 102 (23)
[25] Microstructure evolution, formation of Ti3Ni4 nanoparticles and nanotwins (001)B19′ and interrelation with mechanical properties in the Ti-50.7 at. % Ni alloy during multiple martensitic transformations and subsequent aging
Churakova, Anna
Kayumova, Elina
Tolstov, Nikita
MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1875 - 1878
[26] Effect of stress state on the stress-induced martensitic transformation in polycrystalline Ni-Ti alloy
Jacobus, K
Sehitoglu, H
Balzer, M
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (10): : 3066 - 3073
[27] Stress-assisted two-way memory effect electrically driven in 50at.%Ti-45 at. %Ni-5 at. %Cu alloy
Gariboldi, F.
Besseghini, S.
Airoldi, G.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 : 653 - 656
[28] Effect of annealing on stress-induced transformation behaviors at low temperatures in a Ti-51.8 at.% Ni shape memory alloy
Niitsu, Kodai
Kainuma, Ryosuke
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2014, 251 (10): : 2041 - 2047
[29] Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling
Ganesan, Swaminathan
Vedamanickam, Sampath
Huchappa, Adarsh Sorekunte
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2024, 238 (09) : 1771 - 1777
[30] Increase in the dislocation density and yield stress of the Ti50Ni50 alloy caused by thermal cycling
Churakova, Anna
Gunderov, Dmitry
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (03) : 4732 - 4736

← 1 2 3 4 →