Actual Yield Stress in Ti49.3Ni50.7 (at.%) Alloy in the State As Received from the Manufacturer

被引：0
|
作者：
Zhapova, D. Yu. [1 ]
Lotkov, A. I. [1 ]
Grishkov, V. N. [1 ]
Bobrov, D. I. [1 ]
Gusarenko, A. A. [1 ]
机构：
[1] Russian Acad Sci, Inst Strength Phys & Mat Sci, Siberian Branch, Tomsk, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 67卷 / 08期
关键词：
yield stress; plastic strain; superelasticity effect; inelastic strain; SHAPE-MEMORY; DEFORMATION; TRANSFORMATION; BEHAVIOR;
D O I：
10.1007/s11182-024-03228-8
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The development of inelastic and plastic strains is studied for Ti49.3Ni50.7 (at.%) alloy samples with the structure of high-temperature B2 phase in the state as received from the manufacturer under torsion. It has been established that when the strain of the samples, specified by torsion, is equal to 10.6%, the value of the accumulated plastic strain is 0.35%. Therefore, the actual yield stress of the Ti49.3Ni50.7 (at.%) alloy samples is localized at the end of the pseudo-yield plateau on the stress-strain dependence rather than at the end of the strain hardening stage, as previously thought. The results presented in the work should be taken into account in the practical use of the alloy with this composition as products for technical and medical purposes that experience tensile, bending, and torsional deformations.
引用
收藏
页码：1157 / 1163
页数：7
相关论文
共 39 条
  • [1] Effects of cerium addition on martensitic transformation and microstructure of Ti49.3Ni50.7 alloy
    Cai, Wei
    Liu, Ailian
    Sui, Jiehe
    Zhao, Liancheng
    MATERIALS TRANSACTIONS, 2006, 47 (03) : 716 - 719
  • [2] Investigation on Microstructure and Phase Transformation of La added Ti49.3Ni50.7 Shape Memory Alloy
    Xu, Jiawen
    Liu, Ailian
    Qian, Bingyu
    Cai, Wei
    ADVANCED MATERIALS AND PROCESSES II, PTS 1-3, 2012, 557-559 : 1041 - +
  • [3] Influence of Grain Size and Contact Temperature on the Tribological Behaviour of Shape Memory Ti49.3Ni50.7 Alloy
    A. A. Misochenko
    S. V. Chertovskikh
    L. Sh. Shuster
    V. V. Stolyarov
    Tribology Letters, 2017, 65
  • [4] Influence of Grain Size and Contact Temperature on the Tribological Behaviour of Shape Memory Ti49.3Ni50.7 Alloy
    Misochenko, A. A.
    Chertovskikh, S. V.
    Shuster, L. Sh.
    Stolyarov, V. V.
    TRIBOLOGY LETTERS, 2017, 65 (04)
  • [5] The Cyclic Stability of Superelasticity in Aged Ti49.3Ni50.7 Single Crystals with Oxide Surface
    Eftifeeva, Anna S.
    Panchenko, Elena Y.
    Fatkullin, Ilya D.
    Volochaev, Mikhail N.
    Tagiltsev, Anton I.
    Chumlyakov, Yuriy I.
    METALS, 2022, 12 (12)
  • [6] Effects of Cold-Rolling/Aging Treatments on the Shape Memory Properties of Ti49.3Ni50.7 Shape Memory Alloy
    Chang, Shih-Hang
    Lin, Keng-Hua
    Wu, Shyi-Kaan
    MATERIALS, 2017, 10 (07):
  • [7] Transformation Behavior of a Shape Memory Ni50.7Ti49.3 (at.%) Alloy during Partial Thermal Cycling
    Swaminathan Ganesan
    Sampath Vedamanickam
    Journal of Materials Engineering and Performance, 2023, 32 : 2501 - 2508
  • [8] Transformation Behavior of a Shape Memory Ni50.7Ti49.3 (at.%) Alloy during Partial Thermal Cycling
    Ganesan, Swaminathan
    Vedamanickam, Sampath
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (05) : 2501 - 2508
  • [9] Behavior of Inelastic and Plastic Strains in Coarse-Grained Ti49.3Ni50.7(at%) Alloy Deformed in B2 States
    Zhapova, Dorzhima
    Grishkov, Victor
    Lotkov, Aleksandr
    Timkin, Victor
    Gusarenko, Angelina
    Rodionov, Ivan
    METALS, 2021, 11 (05)
  • [10] The microstructure and martensitic transformation of (Ti49.3Ni50.7)1-x Gdx shape memory alloys
    Liu, A. L.
    Cai, W.
    Gao, Z. Y.
    Zhao, L. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 : 634 - 638
1234