MODELING OF NATURAL GAS COMPOSITION EFFECT ON LOW NOX BURNERS OPERATION IN HEAVY DUTY GAS TURBINE

被引:0
|
作者
Romano, S. [1 ]
Meloni, R. [1 ]
Riccio, G. [1 ]
Nassini, P. C. [2 ]
Andreini, A. [2 ]
机构
[1] Baker Hughes, Florence, Italy
[2] Univ Florence, Dept Ind Engn, Florence, Italy
关键词
FLAME STRETCH;
D O I
暂无
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper addresses the impact of natural gas composition on both the operability and emissions of lean premixed gas turbine combustion system. This is an issue of growing interest due to the challenge for gas turbine manufacturers in developing fuelflexible combustors capable of operating with variable fuel gases while producing very low emissions at the same time. Natural gas contains primarily methane (CH4) but also notable quantities of higher order hydrocarbons such as ethane (C2H6) can also be present. A deep understanding of natural gas combustion is important to obtain the highest combustion efficiency with minimal environmental impact. For this purpose, Large Eddy Simulations of an annular combustor sector equipped with a partially- premixed burner are carried out for two different natural gas compositions with and without including the effect of flame strain rate and heat loss resulting in a more adequate description of flame shape, thermal field and extinction phenomena. Promising results, in terms of NOx, compared against available experimental data, are obtained including these effects on the flame brush modelling, enhancing the fuel-dependency under non adiabatic condition.
引用
收藏
页数:10
相关论文
共 50 条
  • [21] NOx REDUCTION STRATEGY IN GE10 HYDROGEN - FUELLED HEAVY DUTY GAS TURBINE
    Benovsky, Peter
    Brunetti, Iarno
    Sigali, Stefano
    Leroy, Christine
    Gheri, Paolo
    Cocchl, Stefano
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 3, PTS A AND B, 2008, : 983 - 989
  • [22] DESIGN IMPROVEMENT SURVEY FOR NOX EMISSIONS REDUCTION OF A HEAVY-DUTY GAS TURBINE PARTIALLY PREMIXED FUEL NOZZLE OPERATING WITH NATURAL GAS: NUMERICAL ASSESSMENT
    Innocenti, Alessandro
    Andreini, Antonio
    Facchini, Bruno
    Cerutti, Matteo
    Ceccherini, Gianni
    Riccio, Giovanni
    ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 4A, 2015,
  • [23] DESIGN IMPROVEMENT SURVEY FOR NOX EMISSIONS REDUCTION OF A HEAVY-DUTY GAS TURBINE PARTIALLY PREMIXED FUEL NOZZLE OPERATING WITH NATURAL GAS: EXPERIMENTAL CAMPAIGN
    Cerutti, Matteo
    Modi, Roberto
    Kalitan, Danielle
    Singh, Kapil K.
    ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 4B, 2015,
  • [24] Design Improvement Survey for NOx Emissions Reduction of a Heavy-Duty Gas Turbine Partially Premixed Fuel Nozzle Operating With Natural Gas: Numerical Assessment
    Innocenti, Alessandro
    Andreini, Antonio
    Facchini, Bruno
    Cerutti, Matteo
    Ceccherini, Gianni
    Riccio, Giovanni
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2016, 138 (01):
  • [25] Identifying a simplified model for heavy duty gas turbine
    Bahrami, Saeed
    Ghaffari, Ali
    Sadati, S. Hossein
    Thern, Marcus
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2014, 28 (06) : 2399 - 2408
  • [26] FIAT GAS TURBINE FOR HEAVY DUTY HAULAGE.
    Anon
    Turbomachinery International, 1977, 18 (05) : 44 - 45
  • [27] Identifying a simplified model for heavy duty gas turbine
    Saeed Bahrami
    Ali Ghaffari
    S. Hossein Sadati
    Marcus Thern
    Journal of Mechanical Science and Technology, 2014, 28 : 2399 - 2408
  • [28] Failure Analysis of a Heavy Duty Gas Turbine Blade*
    S. Asadikouhanjani
    M. Torfeh
    R. Ghorbanf
    Strength of Materials, 2014, 46 : 608 - 612
  • [29] Status and development trend of the heavy duty gas turbine
    Jiang, Hongde, 1600, Chinese Society for Electrical Engineering (34):
  • [30] Research on the Exit Temperature of a Heavy Duty Gas Turbine
    Su, Pengfei
    Zhao, Shiquan
    Fang, Yu
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2024, 45 (01): : 107 - 114