High-temperature oxidation behavior of double glow plasma Cr-Y alloyed layers on Ti2AlNb alloy

被引:1
|
作者
Zu, Ruijie [1 ]
Wang, Wenbo [1 ]
Lin, Naiming [2 ]
Tian, Linhai [2 ]
Wu, Tao [2 ]
Li, Xiaokai [2 ]
机构
[1] Taiyuan Univ Technol, Coll Mech & Vehicle Engn, Taiyuan 030024, Shanxi, Peoples R China
[2] Taiyuan Univ Technol, Coll Mat Sci & Engn, Taiyuan 030024, Shanxi, Peoples R China
关键词
Cr-Y alloyed layer; Surfaces; Double glow plasma surface alloying technique; Ti2AlNb alloy; Oxidation; RESISTANCE; COATINGS;
D O I
10.1016/j.matlet.2024.136706
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A Cr -Y alloyed layer was synthesized on the surface of Ti2AlNb by double glow plasma surface alloying technique. The morphology, phase composition and oxidation behaviors at 750 degrees C, 800 degrees C, and 850 degrees C of Cr -Y alloyed layers were systematically investigated. The results illustrated that Cr -Y alloyed layer was approximately 10 mu m thick, which the morphology of alloyed layer was uniform and compact, with a flat and uniform interface to the matrix. Oxidation kinetics for the Cr -Y alloyed layer approximately followed the parabolic law, with an oxidation weight gain significantly lower than that of Ti2AlNb. The predominant oxides of Cr -Y layer were CrNbO4, Cr2O3, and Y2O3, which effectively hindered oxygen diffusion into the substrate.
引用
收藏
页数:4
相关论文
共 50 条
  • [21] Oxidation Behavior of Three Different Zones of Linear Friction Welded Ti2AlNb Alloy
    Chen, Xi
    Xie, Faqin
    Ma, Tiejun
    Li, Wenya
    Wu, Xiangqing
    ADVANCED ENGINEERING MATERIALS, 2016, 18 (11) : 1944 - 1951
  • [22] Aluminization of a Si-Y co-deposition coating to protect a Ti2AlNb based alloy from high temperature oxidation
    Xiang, Jiayi
    Xie, Faqin
    Wu, Xiangqing
    Chen, Lianyang
    Dong, Meijuan
    VACUUM, 2020, 174
  • [23] Effect of 0.2% H on high temperature tensile deformation behavior of Ti2AlNb based alloy plate
    Zong, Yingying
    Wen, Daosheng
    Shao, Bin
    Shan, Debin
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2014, 28 (04): : 248 - 254
  • [24] Preparation and high-temperature oxidation behavior of plasma Cr-Ni alloying on Ti6Al4V alloy based on double glow plasma surface metallurgy technology
    Wei, Dong-Bo
    Zhang, Ping-Ze
    Yao, Zheng-Jun
    Wei, Xiang-Fei
    Zhou, Jin-Tang
    Chen, Xiao-Hu
    APPLIED SURFACE SCIENCE, 2016, 388 : 571 - 578
  • [25] HIGH-TEMPERATURE OXIDATION BEHAVIOR OF A NI-CR-AL-FE-Y ALLOY
    TAWANCY, HM
    SRIDHAR, N
    OXIDATION OF METALS, 1992, 37 (3-4): : 143 - 166
  • [26] Influence of Al2O3 addition in NaAlO2 electrolyte on microstructure and high-temperature properties of plasma electrolytic oxidation ceramic coatings on Ti2AlNb alloy
    Ding, Zhao-Ying
    Wang, Yuan-Hong
    Ouyang, Jia-Hu
    Liu, Zhan-Guo
    Wang, Ya-Ming
    Wang, Yu-Jin
    SURFACE & COATINGS TECHNOLOGY, 2019, 370 : 187 - 195
  • [27] The Relationship between Microstructure and Fracture Behavior of TiAl/Ti2AlNb SPDB Joint with High Temperature Titanium Alloy Interlayers
    Liao, Minxing
    Tian, Hao
    Zhao, Lei
    Zhang, Boxian
    He, Jianchao
    MATERIALS, 2022, 15 (14)
  • [28] High-Temperature Oxidation of Double-Glow Plasma Tantalum Alloying on γ-TiAl
    Dongbo Wei
    Pingze Zhang
    Yuqin Yan
    Xiaohu Chen
    Fengkun Li
    Shiyuan Wang
    Zhengjun Yao
    Oxidation of Metals, 2019, 92 : 337 - 351
  • [29] Hot pack rolling the Ti2AlNb alloy prepared by SPS: Testing of the high-temperature properties of the alloy directly without the prior heat treatment
    Sui, Xiaochong
    Lin, Jie
    Cheng, Su
    Wang, Guofeng
    Li, Zhengwei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 7635 - 7643
  • [30] High-Temperature Oxidation of Double-Glow Plasma Tantalum Alloying on γ-TiAl
    Wei, Dongbo
    Zhang, Pingze
    Yan, Yuqin
    Chen, Xiaohu
    Li, Fengkun
    Wang, Shiyuan
    Yao, Zhengjun
    OXIDATION OF METALS, 2019, 92 (3-4): : 337 - 351