Remarkable improvement in photocatalytic activity of g-C3N4 3 N 4 for NO oxidation through surface hydroxylation

The nitrogen oxide emissions originating from combustion pose significant risks to the environment. Photocatalysis is considered an efficient and environmentally friendly strategy to alleviate this problem. Graphitic carbon nitride (g-C3N4) is regarded as one of the most promising organic photocatalytic materials for environmental purification. However, its small specific surface area, weak adsorption and high recombination rate of charge carriers result in low intrinsic photocatalytic activity. To overcome these obstacles, a hydrothermal treatment of dicyandiamide-derived g-C3N4 (DCN) at different temperatures (140-200 degrees C) was employed to enhance the photocatalytic activity for NO oxidation. The experimental results demonstrated a significant improvement in the photocatalytic oxidation removal rate of NO after a hydrothermal treatment. The optimal photocatalyst, DCN-180, treated at 180 degrees C, demonstrated the highest NO removal efficiency (65.0 %), which is twice the value of pristine DCN (32.5 %). Additionally, the formation of the toxic intermediate NO2 was effectively suppressed during the reaction. Photoelectrochemical tests revealed that DCN-180 exhibited higher photocurrent density and smaller impedance radius compared to the untreated g-C3N4 sample. Moreover, density functional theory (DFT) calculations confirmed that the DCN-180 sample showed a stronger ability to adsorb O2 and NO. The enhanced photocatalytic NO oxidation performance of DCN-180 has been primarily attributed to its enlarged specific surface area (from 10.7 to 35.5 m2 g- 1), local polarization effect, reduced interfacial charge transfer resistance, and improved adsorption abilities for NO and O2 molecules. This study provides valuable insights for designing and preparing highly efficient g-C3N4 based photocatalysts through surface modification for photocatalytic NO purification.