TRIBOLOGICAL ANALYSIS OF GEOPOLYMERS COATED WITH MODIFIED EPOXY COATINGS AND AFTER PLASMA TREATMENT

被引：0

作者：

Ruzek, Vojtech ^{[1
]}

Krafka, Michal ^{[1
]}

Bakalova, Totka ^{[1
]}

Ryvolova, Martina ^{[1
]}

机构：

[1] Tech Univ Liberec, Dept Mat, Liberec, Czech Republic

来源：

32ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2023 | 2024年

关键词：

Geopolymer; epoxy coating; wear resistance; microparticles; nanoparticles; hydrophobicity; metal;

D O I：

10.37904/metal.2023.4650

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This paper investigates the properties of epoxy based coatings modified with antimicrobial metal nano- and microparticles. Surface modifications have been applied to geopolymer materials in order to improve their properties. Samples of modified epoxy coating with 1% of copper or silver nano- or microparticles were prepared, applied on geopolymer samples and their tribological properties were investigated by linear reciprocating tribological test and drop test to measure change in wear resistance and hydrophobicity. Properties of coatings on geopolymer samples treated with cold, atmospheric plasma were also investigated to determine its effect on adhesion between epoxides and geopolymer, as well as other properties of the coating, as plasma may be used to increase adhesion of various coatings, thin layers and other surface modifications.

引用

页码：392 / 401

页数：10

共 50 条

[21] Surface coatings analysis and their effects on reduction of tribological properties of coated aluminum under motion with ML approach
Chowdhury, Mohammad Asaduzzaman
Hossain, Nayem
Al Masum, Abdullah
Islam, Md Sakibul
Shahin, Mohammad
Hossain, Md Imran
Shuvho, Md Bengir Ahmed
Ali, Md Ramjan
Ahmed, A. K. M. Foysal
Nandee, Rajib
MATERIALS RESEARCH EXPRESS, 2021, 8 (08)
[22] THE INFLUENCE OF PRE-TREATMENT PLASMA NITRIDING ON TRIBOLOGICAL PROPERTIES OF TiN COATINGS DEPOSITED BY PACVD
Mahdipoor, M. S.
Mahboubi, F.
Raoufi, M.
Elmkhah, H.
Habibi, M. H.
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND ENERGY MATERIALS, 2011, : 117 - 126
[23] The Influence of Plasma Nitriding Pre-Treatment on Tribological Properties of TiN Coatings Deposited by PACVD
M. S. Mahdipoor
F. Mahboubi
Sh. Ahangarani
M. Raoufi
H. Elmkhah
Journal of Materials Engineering and Performance, 2012, 21 : 958 - 964
[24] The Influence of Plasma Nitriding Pre-Treatment on Tribological Properties of TiN Coatings Deposited by PACVD
Mahdipoor, M. S.
Mahboubi, F.
Ahangarani, Sh
Raoufi, M.
Elmkhah, H.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (06) : 958 - 964
[25] Epoxy resin filled with tire rubber particles modified by plasma surface treatment
Xu, ZL
Losure, NS
Gardner, SD
JOURNAL OF ADVANCED MATERIALS, 1998, 30 (02): : 11 - 18
[26] Epoxy resin filled with tire rubber particles modified by plasma surface treatment
Mississippi State Univ, United States
J Adv Mater, 2 (11-18):
[27] Preparation and Corrosion Resistance Analysis of Modified Cerium Oxide/Waterborne Epoxy Composite Coatings
Xiao, Yao
He, Xiaoyan
Wan, Tao
Bai, Xiuqin
Surface Technology, 2024, 53 (14): : 96 - 105
[28] Mechanical properties and tribological behavior of alumina/zirconia composites modified with SiC and plasma treatment
Liu, S. Y.
Wang, Y.
Zhou, C.
Pan, Z. Y.
WEAR, 2015, 332 : 885 - 890
[29] The effect of modified epoxy sealing on the electrochemical corrosion behaviour of reactive plasma-sprayed TiN coatings
Liu, Zhe
Yan, Dianran
Dong, Yanchun
Yang, Yong
Chu, Zhenhua
Zhang, Zhao
CORROSION SCIENCE, 2013, 75 : 220 - 227
[30] DSC analysis of epoxy molding compound with plasma polymer-coated silica fillers
Roh, JH
Lee, JH
Kim, NI
Kang, HM
Yoon, TH
Song, KH
JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 90 (09) : 2508 - 2516

← 1 2 3 4 5 →