Chatter and Surface Waviness Analysis in Oerlikon Face Hobbing of Spiral Bevel Gears

A vectorized analytical model for the cutting dynamics in the spiral bevel gear face hobbing process has been developed, which is based on machine tool kinematics and vibration vectorization. The structural modal parameters of the cutter head spindle system are obtained through experimental modal analysis with hammer impact testing. The analytical model is utilized to simulate the generation of simulated vibration acceleration signals during spiral bevel gear hobbing. A wavelet threshold denoising method is applied to process the simulated vibration signals of the spiral bevel gear face hobbing with added white noise. Signal processing methods, including short-time Fourier transform are employed for time-domain analysis, frequency-domain analysis, and time-frequency-domain analysis of measured signals and simulated signals, thereby extracting the corresponding statistical features. In addition to the results of the experimental modal analysis, the causes of chatter in spiral bevel gear hobbing are discussed in detail, revealing that the main factor is cutter head vibration in the Y direction of the Hunan ZDCY CNC EQUIPMENT YKA2260 machine tool used in this research. The error in the time-domain characteristic parameters between simulated signals and measured vibration acceleration signals is within 15%, with a difference of 3.5% in spectral peak values. The predicted tooth surface morphology from simulation matches the actual morphology on the workpiece, comprehensively validating the reliability of the cutting dynamics model for the spiral bevel gear face hobbing process. Another conclusion drawn from numerical simulation experiments is that the amount of tooth surface waviness of the spiral bevel gears is the ratio of tool chatter frequency to cutting fundamental frequency.