The mechanical properties of Kevlar three-dimensional angle-interlock fabrics and composites

被引：0
|
作者：
Shi, Juanjuan [1 ]
Chen, Hongxia [1 ]
Xu, Ninghao [1 ]
Huang, Xiaomei [1 ]
Cao, Haijian [1 ]
机构：
[1] Nantong Univ, Sch Text & Clothing, Nantong, Jiangsu, Peoples R China
来源：
JOURNAL OF THE TEXTILE INSTITUTE | 2024年
基金：
国家重点研发计划;
关键词：
Three-dimensional angle-interlock (3DAI); warp degradation rate; warp crimp percentage; bending property; low-velocity impact property; PLAIN WOVEN; 3D; BEHAVIOR; DAMAGE; 2D; PERFORMANCE;
D O I：
10.1080/00405000.2024.2366704
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
In this article, in order to investigate the difference of mechanical properties between three-dimensional angle-interlock (3DAI) structure and two-dimensional (2D) structure. Kevlar filaments were used as raw material to prepare 3DAI fabrics. The tensile properties of Kevlar 3DAI fabrics were investigated and the influence of warp damage and crimp wave height on the tensile properties was analyzed too. The bending properties and low-velocity impact properties of the 3DAI Kevlar/EP composites and the 2D composites were compared. The results revealed that the warp degradation and crimp percentage in 3DAI fabrics increase with the increase of weft density. The maximum warp degradation rate is 15% and the maximum crimp percentage is 5.4%, which has a negative effect on the mechanical properties of the 3DAI fabrics and the developed Kevlar/EP composites. Compared with the 2D plain composites, the 3DAI composites have superior impact resistance and anti-stratification performance. Moreover, which also has a superior ability to withstand multiple impacts.
引用
收藏
页数：13
相关论文
共 50 条
  • [41] Mechanical properties of three-dimensional braided composites
    Sun, X
    Sun, CJ
    COMPOSITE STRUCTURES, 2004, 65 (3-4) : 485 - 492
  • [42] Experimental Study of Mechanical Behavior of 3D Angle-Interlock Woven Fabrics under Cyclic Load
    Zhiming Chen
    Shidong Pan
    Zhengong Zhou
    Applied Composite Materials, 2021, 28 : 733 - 751
  • [43] Experimental Study of Mechanical Behavior of 3D Angle-Interlock Woven Fabrics under Cyclic Load
    Chen, Zhiming
    Pan, Shidong
    Zhou, Zhengong
    APPLIED COMPOSITE MATERIALS, 2021, 28 (03) : 733 - 751
  • [44] MODELING OF 3-D ANGLE-INTERLOCK TEXTILE STRUCTURAL COMPOSITES
    WHITNEY, TJ
    CHOU, TW
    JOURNAL OF COMPOSITE MATERIALS, 1989, 23 (09) : 890 - 911
  • [45] Properties of 5-layer angle-interlock Kevlar-based composite structure manufactured from vacuum bagging
    Zahid, Bilal
    Chen, Xiaogang
    JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (25) : 3227 - 3234
  • [46] Research on Bending and Ballistic Performance of Three-Dimensional Ply-to-Ply Angle Interlock Kevlar/EP Armor Material
    Wang, Mengxiao
    Zhong, Lin
    Cao, Haijian
    Chen, Hongxia
    Huang, Xiaomei
    MATERIALS, 2022, 15 (19)
  • [47] Bending property and damage mechanism of three-dimensional woven angle interlock SiCf/SiC composites
    Yang T.
    Wang L.
    Qiu H.
    Wang X.
    Zhang D.
    Qian K.
    Fangzhi Xuebao/Journal of Textile Research, 2020, 41 (12): : 73 - 80
  • [48] Study of three-dimensional spacer fabrics: Physical and mechanical properties
    Yip, Joanne
    Ng, Sun-Pui
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 206 (1-3) : 359 - 364
  • [49] Micromechanical model for elastic properties of 3D angle-interlock woven ceramic composites
    Chang, Yanjun
    Jiao, Guiqiong
    Wang, Bo
    Liu, Hongxia
    Yingyong Lixue Xuebao/Chinese Journal of Applied Mechanics, 2007, 24 (01): : 146 - 150
  • [50] Homogenization of the Mechanical Behavior of a Layer-to-Layer Angle-Interlock Composite
    Lapeyronnie, P.
    Le Grognec, P.
    Binetruy, C.
    Boussu, F.
    RECENT ADVANCES IN TEXTILE COMPOSITES, 2010, : 20 - +
12345