Effects of normalizing process on microstructure, texture, and precipitates of Sn bearing oriented silicon steel

Low temperature heating process of the slab has become the mainstream process for producing high quality oriented silicon steel due to its environmental protection, low cost, and high yield. For this process, the number of inhibitors is less and the size is large, resulting in insufficient inhibition, coarsen grains during primary recrystallization, and insufficient driving force for secondary recrystallization, which reduces the magnetic properties of the product. These shortcomings can be improved by optimizing the inhibitors and normalizing processes. The effects of normalizing processes on the microstructure, texture, and precipitations of lowtemperature oriented silicon steel containing Sn were studied by OM, SEM, TEM, and EBSD with Fe-3%Si hot-rolled plate as initial material. The experimental results show that the sample has the best performance in terms of microstructure, texture, and precipitations with the two-stage boiling water cooling normalizing process that the heating temperature is 1150 degrees C, and the normalizing intermediate temperature is 850 degrees C. With the above parameters, the microstructure is inhomogeneous along thickness. There are more {111}<112> textures, which are favorable to the growth of Goss texture. The proportion of high energy grain boundary reached 54.2%. The precipitates are significantly refined, which enhances the ability to inhibit primary recrystallization. The subsurface thickness of the hot rolled plate increases from 40.6% to 62.1% with increasing Sn content from 0.01% to 0.11%. The degree of tin segregation at grain boundary increases with the increase of normalizing temperature and the decrease of medium soaking temperature.