Machine Learning based calibration SDR in Digital Twin application

Software-Defined Radios are radio communications devices that have been growing and developing on a larger scale in recent years. Communications are intrinsically embedded in our day by day, thus presenting a higher motivation to use software-defined radios due to its attractive cost. However they present technical limitations. This paper addresses this problem, which is the non-linearity behaviour of gain and frequency in the LimeSDR-USB. That is, this equipment is used to produce a FM signal with an associated frequency and gain before being parameterised according to the internal parameters of each software-defined radio. Each software-defined radio presents a value of frequency and gain of its own, which correlates to the generated signals at the output level. To avoid this, machine learning networks were used, in which networks were trained to adapt to the non -linearity of these devices and correct it without the user noticing. This way, the user sets a desired frequency and gain in a signal, at the output of the software-defined radios, and a neural network calculates which values the software -defined radios should be parameterised, thus mitigating the non -linearity behaviour. This paper presents the evaluation of a laboratory prototype based on low-cost commercial software-defined radios equipment, to replace an expensive metrologically calibrated equipment used for radio frequency tests on a new concept of industrial test station, with description of the integration of Digital Twins, with their physical and virtual parts.