On the dual diffusion flow of Powell-Eyring hybrid nanofluid with motile microorganism and non-uniform heat source using Darcy-Forchheimer model

被引:0
|
作者
Ullah, Naeem [1 ]
Hussain, Altaf [2 ]
Bouzgarrou, Souhail [3 ]
Khalil, Sana A. [4 ]
机构
[1] Islamia Coll Peshawar, Dept Math, Peshawar 25120, Pakistan
[2] Govt Postgrad Coll, Dept Phys, Karak, Pakistan
[3] Jazan Univ, Coll Engn, Dept Civil Engn, Jazan 45142, Saudi Arabia
[4] Univ Tabuk, Alwajh Coll, Dept Chem, Tabuk, Saudi Arabia
关键词
Hybrid nanofluid; non-uniform heat source; Powell-Eyring fluid; stagnation point flow through stretching cylinder; STAGNATION-POINT FLOW; THERMAL-RADIATION; SKIDDING BEHAVIOR; SHEET; TRANSPORT; SURFACE; FLUID; MHD;
D O I
10.1080/10407790.2024.2363502
中图分类号
O414.1 [热力学];
学科分类号
摘要
This communication elaborates the rheological behavior of bioconvection flow of Powell-Eyring hybrid nanofluid over a stretchable heated cylinder embedded in Darcy-Forchheimer porous medium. The single and two-phase nanofluid models are used as mixture model by taking volumetric friction and dual diffusion of injected nanomaterial's, while the Buongiorno model takes the dual diffusion of nanomaterials, allowing us to evaluate the thermophoresis and Brownian diffusion properties. The governing equations are solved with an efficient Runge-Kutta-Fehlberg numerical technique. The effects of appropriate parameters on flow, temperature, concentration, and motile microorganism. Our findings reveal that the fluid velocity increases with curvature parameter, while detract with Darcy and porosity parameter. Temperature is increasing function of Brownian, thermophoresis and heat source parameters. The concentration and motile profile increases with curvature parameter. An escalating trend for energy and mass transport was seen against curvature and thermophoresis parameter. Higher values of Curvature and Schmidt number depict positive impact on nanoparticle concentration, while the results for chemical reaction are conflicting. An increasing value of Brownian and thermophoresis parameters promote higher temperature. The temperature and thermal boundary layer thickness are also affected by the heat source and sink parameters in opposite manner.
引用
收藏
页数:19
相关论文
共 45 条
  • [41] Simulation and non-similar analysis of magnetized SWCNT-MWCNT hybrid nanofluid flow in porous media using Darcy-Forchheimer-Brinkman model
    Blessy, T. Giftlin
    Kumar, B. Rushi
    CASE STUDIES IN THERMAL ENGINEERING, 2024, 64
  • [42] Comparative analysis of response surface methodology and sensitivity analysis on radiative hybrid nanofluid flow over an inclined spinning disk with non-uniform heat source
    Pyari, Devarsu Radha
    Thumma, Thirupathi
    Ontela, Surender
    MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2025, 8 (03)
  • [43] Combined Effect of Non-Linear Mixed Convection, and Non-Uniform Heat Source/Sink on Casson Ternary Hybrid Nanofluid Flow Across a Stretched Rotatory Disk
    Paul, Ashish
    Patgiri, Bhagyashri
    Sarma, Neelav
    JOURNAL OF NANOFLUIDS, 2024, 13 (02) : 586 - 599
  • [44] Functional magnetic Maxwell viscoelastic nanofluids for tribological coatings- a model for stretching flow using the generalized theory of heat-mass fluxes, Darcy-Forchheimer formulation and dual convection
    Nasir, Muhammad
    Waqas, M.
    Beg, O. Anwar
    Znaidia, Sami
    Khan, W. A.
    Zamri, Nurnadiah
    TRIBOLOGY INTERNATIONAL, 2023, 187
  • [45] Cattaneo-Christov heat flux theory toward the magnetohydrodynamic micropolar hybrid nanofluid flow past a stretching/shrinking sheet with non-uniform heat source/sink and thermal radiation
    Algehyne, Ebrahem A.
    Alrihieli, Haifaa F.
    Saeed, Anwar
    Dawar, Abdullah
    Kumam, Poom
    ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 2022, 102 (10):