Fresh properties and strength evolution of slag modified fibre-reinforced metakaolin-based geopolymer composite for 3D concrete printing application

被引：0

作者：

Jaji, M. B. ^{[1
]}

Van Zijl, G. P. A. G. ^{[1
]}

Babafemi, A. J. ^{[1
]}

机构：

[1] Stellenbosch Univ, Div Struct Engn & Civil Engn Informat, Dept Civil Engn, Stellenbosch, South Africa

来源：

CURRENT PERSPECTIVES AND NEW DIRECTIONS IN MECHANICS, MODELLING AND DESIGN OF STRUCTURAL SYSTEMS | 2022年

关键词：

Metakaolin; slag; alkaline activator; 3D printed geopolymer; fresh and mechanical properties;

D O I：

10.1201/9781003348450-267

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper develops mixes for slag modified fibre-reinforced metakaolin-based geopolymer composite (GPC) to address slow setting time and efflorescence. The fresh properties of the mixes showed that slump and slump flow reduced with increasing slag content. There is an increase in compressive and flexural strength as the slag content increases. The visual observation on the hardened specimens shows no efflorescence at the age of 28-day. The control sample (Mix 1) and Mix 2 are 3D printable. The mix with slag content shows better structural build-up.

引用

页码：567 / 568

页数：2

共 33 条

[21] Current State and Challenges of Natural Fibre-Reinforced Polymer Composites as Feeder in FDM-Based 3D Printing
Rajendran Royan, Nishata Royan
Leong, Jie Sheng
Chan, Wai Nam
Tan, Jie Ren
Shamsuddin, Zainon Sharmila Binti
POLYMERS, 2021, 13 (14)
[22] Fresh and hardened properties of 3D printable polymer-fibre-reinforced high-performance cementitious composite
Luong Pham
Panda, Biranchi
Phuong Tran
ADVANCES IN CEMENT RESEARCH, 2022, 34 (02) : 80 - 92
[23] PVA fiber reinforced red mud-based geopolymer for 3D printing: Printability, mechanical properties and microanalysis
Han, Kang
Gu, Fei
Yang, Huashan
Tian, Xinchen
Du, Xiangqin
JOURNAL OF BUILDING ENGINEERING, 2024, 97
[24] 3D printing of bioactive macro/microporous continuous carbon fibre reinforced hydroxyapatite composite scaffolds with synchronously enhanced strength and toughness
Zhao, Xueni
Liu, Ao
Zhou, Lian
Yang, Zhi
Wei, Sensen
Zhao, Zhenyang
Fan, Qiang
Ma, Linlin
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2022, 42 (10) : 4396 - 4409
[25] Structural fibre-reinforced cement-based composite designed for particle bed 3D printing systems. Case study Parque de Castilla Footbridge in Madrid
de la Fuente, A.
Blanco, A.
Galeote, E.
Cavalaro, S.
CEMENT AND CONCRETE RESEARCH, 2022, 157
[26] Effect of steel slag on rheological and mechanical properties of sulfoaluminate cement-based sustainable 3D printing concrete
Wu, Mushuang
Wang, Zixiao
Chen, Yuxuan
Zhu, Mengyu
Yu, Qingliang
JOURNAL OF BUILDING ENGINEERING, 2024, 98
[27] FFF-based 3D printing path design of interconnected microchannel network inside continuous fibre-reinforced composites for thermal manipulation
Li, Nanya
Sun, Changkun
Lu, Yongzhi
Zhang, Jiaming
Li, Jidong
COMPOSITES PART B-ENGINEERING, 2025, 298
[28] Surface topology modification using 3D printing techniques to enhance the interfacial bonding strength between polymer substrates and prepreg carbon fibre-reinforced polymers
Hamed Abdoli
Olaf Diegel
Simon Bickerton
The International Journal of Advanced Manufacturing Technology, 2024, 131 : 1867 - 1878
[29] Surface topology modification using 3D printing techniques to enhance the interfacial bonding strength between polymer substrates and prepreg carbon fibre-reinforced polymers
Abdoli, Hamed
Diegel, Olaf
Bickerton, Simon
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (3-4): : 1867 - 1878
[30] A Comparative Study of the Rheological Properties of a Fly Ash-Based Geopolymer Reinforced with PP Fiber for 3D Printing: An Experimental and Numerical Approach
Sariyev, Bakytzhan
Konysbekov, Alisher
Jexembayeva, Assel
Konkanov, Marat
BUILDINGS, 2024, 14 (07)

← 1 2 3 4 →