Investigation of anisotropic strength criteria for layered rock mass

被引:1
|
作者
Huang, Shuling [1 ]
Zhang, Jinxin [1 ]
Ding, Xiuli [1 ]
Zhang, Chuanqing [2 ,3 ]
Han, Gang [1 ]
Yu, Guoqi [1 ]
Qu, Lulu [1 ]
机构
[1] Changjiang River Sci Res Inst, Minist Water Resources, Key Lab Geotech Mech & Engn, Wuhan 430071, Peoples R China
[2] Chinese Acad Sci, State Key Lab Geomech & Geotech Engn, Inst Rock & Soil Mech, Wuhan 430000, Peoples R China
[3] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
基金
中国国家自然科学基金;
关键词
Layered rock; Strength anisotropy; Strength criterion; Experimental veri fication; LARGE UNDERGROUND CAVERNS; FAILURE CRITERION; NUMERICAL-SIMULATION; SCHISTOSE ROCKS; BEHAVIOR; DISCONTINUITIES; ORIENTATION; PREDICTION; STABILITY;
D O I
10.1016/j.jrmge.2023.06.006
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
Layered rock mass is a type of engineering rock mass with sound mechanical anisotropy, which is generally unfavorable to the stability of underground works. To investigate the strength anisotropy of layered rock, the Mohr-Coulomb and Hoek-Brown criteria are introduced to establish the two transverse isotropic strength criteria based on Jaeger's single weak plane theory and maximum axial strain theory, and parameter determination methods. Furthermore, the sensitivity of strength parameters (K1, K2, and K3) that are used to characterize the anisotropy strength of non-sliding failure involved in the strength criteria and confining pressure are investigated. The results demonstrate that strength parameters K1 and K2 affect the strength of layered rock samples at all bedding angles except for the bedding angle of 90 degrees and the angle range that can cause the shear sliding failure along the bedding plane. The strength of samples at any bedding angle decreases with increasing K1, whereas the opposite is for K2. Except for bedding angles of 0 degrees and 90 degrees and the bedding angle range that can cause the shear sliding along the bedding plane, K3 has an impact on the strength of rock samples with other bedding angles that the specimens' strength increases with increase of K3. In addition, the strength of the rock sample increases as confining pressure rises. Furthermore, the uniaxial and triaxial tests of chlorite schist samples were carried out to verify and evaluate the strength criteria proposed in the paper. It shows that the predicted strength is in good agreement with the experimental results. To test the applicability of the strength criterion, the strength data of several types of rock in the literature are compared. Finally, a comparison is made between the fitting effects of the two strength criteria and other available criteria for layered rocks. (c) 2024 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).
引用
收藏
页码:1289 / 1304
页数:16
相关论文
共 50 条
  • [41] Dynamic compression characteristics of layered rock mass of significant strength changes in adjacent layers
    Sen Wen
    Chunshun Zhang
    Yulin Chang
    Ping Hu
    [J]. Journal of Rock Mechanics and Geotechnical Engineering, 2020, (02) : 353 - 365
  • [42] HIGH-PRESSURE SHEAR-STRENGTH INVESTIGATION OF AN ANISOTROPIC MICA SCHIST ROCK
    MCCABE, WM
    KOERNER, RM
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 1975, 12 (08): : 219 - 228
  • [43] 3-D Rock Mass Strength Criteria-A Review of the Current Status
    Kulatilake, Pinnaduwa H. S. W.
    [J]. GEOTECHNICS, 2021, 1 (01): : 128 - 146
  • [44] Heteroscedasticity of axial strength of transversely anisotropic rock
    Bozorgzadeh, N.
    Harrison, J. P.
    [J]. GEOTECHNIQUE LETTERS, 2014, 4 (04) : 322 - 329
  • [45] A COMPRESSIVE STRENGTH CRITERION FOR ANISOTROPIC ROCK MATERIALS
    ASHOUR, HA
    [J]. CANADIAN GEOTECHNICAL JOURNAL, 1988, 25 (02) : 233 - 237
  • [46] Failure mode and strength anisotropic characteristic of stratified rock mass under uniaxial compressive situation
    Guang-yin Lu
    Zi-qiang Zhu
    Qun-yi Liu
    Xian-qi He
    [J]. Journal of Central South University of Technology, 2009, 16 : 663 - 668
  • [47] Failure mode and strength anisotropic characteristic of stratified rock mass under uniaxial compressive situation
    鲁光银
    朱自强
    柳群义
    何现启
    [J]. Journal of Central South University, 2009, 16 (04) : 663 - 668
  • [48] Initial Strength Analysis of Anisotropic Concrete Supports for Spherical Mine Workings in a Sedimentary Rock Mass
    Zaitsev, A., V
    Fukalov, A. A.
    Sokolkin, Yu, V
    [J]. PHYSICAL AND MATHEMATICAL MODELING OF EARTH AND ENVIRONMENT PROCESSES (2018), 2019, : 463 - 471
  • [49] Failure mode and strength anisotropic characteristic of stratified rock mass under uniaxial compressive situation
    Lu Guang-yin
    Zhu Zi-qiang
    Liu Qun-yi
    He Xian-qi
    [J]. JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2009, 16 (04): : 663 - 668
  • [50] STRENGTH CRITERIA FOR ANISOTROPIC BRITTLE MATERIALS.
    Huang, C.L.D.
    [J]. AIAA journal, 1985, 23 (10): : 1590 - 1593