EFFECT OF PRIME MOVER REGENERATOR RADIUS ON THE PERFORMANCE AND CHARACTERISTIC OF ACOUSTIC FIELD OF THERMOACOUSTIC REFRIGERATOR DRIVEN BY PRIME MOVER

被引：0

作者：

Farikhah, Irna ^{[1
]}

Isnandi, Rifqi Nurfadhilah ^{[1
]}

Setiawan, Ikhsan ^{[2
]}

Hermana, Rifki ^{[1
]}

Rokhmawati, Endang Dian ^{[3
]}

Nuroso, Harto ^{[4
]}

Novita, Mega ^{[5
]}

Margono, Margono ^{[6
]}

机构：

[1] Univ PGRI, Dept Mech Engn, Semarang, Indonesia

[2] Univ Gadjah Mada, Dept Phys, Yogyakarta, Indonesia

[3] Univ Negeri, Dept Phys Educ, Semarang, Indonesia

[4] Univ PGRI, Dept Phys Educ, Semarang, Indonesia

[5] Univ PGRI, Grad Sch Nat Sci Educ, Semarang, Indonesia

[6] Univ PGRI, Dept Elect Engn, Semarang, Indonesia

来源：

THERMAL SCIENCE | 2024年 / 28卷 / 2C期

关键词：

prime mover; refrigerator; thermoacoustic; acoustic field; ENGINE;

D O I：

10.2298/TSCI230423225F

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Refrigerated truck is indispensable transportation for food and medicine. However, the truck has been using the harmful substance such as CFC or HCFC. Therefore, an alternative cooler is essential such as thermoacoustic refrigerator. The refrigerator is driven by the thermoacoustic heat engine (prime mover), so the prime mover can convert the thermal or waste heat into the acoustic energy for driving the refrigerator. There are some parameters that can improve the efficiency of the refrigerator system. The aim is to investigate the impact of prime mover regenerator radius on the efficiency and characteristic of acoustic field. It was found that the best performance of the whole refrigeration system was achieved when the radius is 0.68. The engine and cooler efficiency are 84% and 38%, respectively. In addition, the acoustic field characteristic was also analyzed to elucidate the mechanism in the refrigerator system.

引用

页码：1837 / 1848

页数：12

共 50 条

[31] Influence of working fluid on the performance of a standing-wave thermoacoustic prime mover
Hao, X. H.
Ju, Y. L.
Behera, Upendra
Kasthurirengan, S.
CRYOGENICS, 2011, 51 (09) : 559 - 561
[32] SPECIFIC ACOUSTIC-IMPEDANCE MEASUREMENTS OF AN AIR-FILLED THERMOACOUSTIC PRIME MOVER
ARNOTT, WP
BASS, HE
RASPET, R
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1992, 92 (06): : 3432 - 3434
[33] Influence of operational parameters on performance of twin thermoacoustic prime mover CFD studies
Jabbar, P.
Hariharan, N. M.
Sivashanmugam, P.
Kasthurirengan, S.
ENGINEERING COMPUTATIONS, 2016, 33 (03) : 759 - 766
[34] Experimental observation on a small-scale thermoacoustic prime mover
Tao Jin
Bao-sen Zhang
Ke Tang
Rui Bao
Guo-bang Chen
Journal of Zhejiang University-SCIENCE A, 2007, 8 : 205 - 209
[35] NUMERICAL ANALYSIS OF THERMOACOUSTIC HEAT PUMP DRIVING BY PRIME MOVER
Zhang, Dongwei
Guan, Jian
He, Zhuantao
Shen, Chao
Li, Hongxin
Tang, Songzhen
Wang, Lin
Lei, Yonggang
HEAT TRANSFER RESEARCH, 2025, 56 (03)
[36] Basic operation principle of a novel cascade thermoacoustic prime mover
Luo, E.
Dai, E.
Ling, H.
ICEC 20: PROCEEDINGS OF THE TWENTIETH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE, 2005, : 317 - 320
[37] Study of an annular thermoacoustic prime mover, part (II) experiment
Lin, Hsiao-Tseng
2001, Chung Cheng Institute of Technology, Tashi, Taiwan (30):
[38] Theoretical prediction on the coupling of thermoacoustic prime mover and RC load
Tang, K.
Chen, G. B.
Jia, Z. Z.
Jiang, N.
Bao, R.
ICEC 20: PROCEEDINGS OF THE TWENTIETH INTERNATIONAL CRYOGENIC ENGINEERING CONFERENCE, 2005, : 301 - 304
[39] Investigation on the different types of resonators in the thermoacoustic Stirling prime mover
Xie, Xiujuan
Li, Qing
Li, Zhengyu
Li, Qiang
ULTRASONICS, 2006, 44 (e1503-e1505) : E1503 - E1505
[40] Design, Construction and Evaluation of a Standing Wave Thermoacoustic Prime Mover
Setiawan, Ikhsan
Murti, Prastowo
Achmadin, Wahyu N.
Utomo, Agung B. S.
Nohtomi, Makoto
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE AND EXHIBITION OF SUSTAINABLE ENERGY AND ADVANCED MATERIALS 2015 (ICE-SEAM 2015), 2016, 1717

← 1 2 3 4 5 →