Using machine learning to automatically measure kyphotic and lordotic angle measurements on radiographs for children with adolescent idiopathic scoliosis

Measuring the kyphotic angle (KA) and lordotic angle (LA) on lateral radiographs is important to truly diagnose children with adolescent idiopathic scoliosis. However, it is a time-consuming process to measure the KA because the endplate of the upper thoracic vertebra is normally difficult to identify. To save time and improve measurement accuracy, a machine learning algorithm was developed to automatically extract the KA and LA. The accuracy and reliability of the T1 -T12 KA, T5 -T12 KA, and L1 -L5 LA were reported. A convolutional neural network was trained using 100 radiographs with data augmentation to segment the T1 -L5 vertebrae. Sixty radiographs were used to test the method. Accuracy and reliability were reported using the percentage of measurements within clinical acceptance (<= 9 degrees ), standard error of measurement (SEM), and inter -method intraclass correlation coefficient (ICC 2,1 ). The automatic method detected 95 % (57/60), 100 %, and 100 % for T1 -T12 KA, T5 -T12 KA, and L1 -L5 LA, respectively. The clinical acceptance rate, SEM, and ICC 2,1 for T1 -T12 KA, T5 -T12 KA, and L1 -L5 LA were (98 %, 0.80 degrees , 0.91), (75 %, 4.08 degrees , 0.60), and (97 %, 1.38 degrees , 0.88), respectively. The automatic method measured quickly with an average of 4 +/- 2 s per radiograph and illustrated how measurements were made on the image, allowing verifications by clinicians.