A life cycle assessment of the laboratory-scale oxidative liquefaction as the chemical recycling method of the end-of-life wind turbine blades

被引:6
|
作者
Sobek, Szymon [1 ]
Lombardi, Lidia [2 ]
Mendecka, Barbara [2 ]
Mumtaz, Hamza [3 ]
Sajdak, Marcin [4 ]
Muzyka, Roksana [4 ]
Werle, Sebastian [3 ]
机构
[1] Silesian Tech Univ, Dept Heating Ventillat & Dust Removal Technol, Stanis lawa Konarskiego St 20, PL-44100 Gliwice, Poland
[2] Niccolo Cusano Univ, Dept Ind Engn, Via Don Carlo Gnocchi 3, I-00166 Rome, Italy
[3] Silesian Tech Univ, Dept Thermal Technol, Stanis lawa Konarskiego St 22, PL-44100 Gliwice, Poland
[4] Silesian Tech Univ, Dept Air Proteciton, Stanis lawa Konarskiego St 22B, PL-44100 Gliwice, Poland
关键词
Wind turbine blades; Oxidative liquefaction; Wet oxidation; Chemical recycling; LCA; Composite waste; GLASS-FIBER; WASTE;
D O I
10.1016/j.jenvman.2024.121241
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
According to the latest reports, estimated values of 50,000-66 000 t of end-of-life wind turbine blades (WTB) are expected to be decommissioned in Europe in 2025-2030, posing a significant threat from the environmental and waste management perspectives. This study aims to present the preliminary Life Cycle Assessment (LCA) with sensitivity and uncertainty analysis of the lab-scale oxidative liquefaction process of the WTB, as the original method to recover the high-quality glass fibers with simultaneous production of the secondary chemicals: phenols, ketones, acids, and fatty acids, from the oxidation of the epoxy resin from the polymer matrix. The LCA is based on the experimental results of the oxidative liquefaction process carried out on a laboratory scale using a Parr 500 ml batch reactor, at two different conditions sets for the functional unit (FU) of 1 kg of treated WTB. Each of the analyzed scenarios resulted in higher impact indicators compared to the landfilling. The highest quality fibers were obtained at 350 degrees C and 40 wt % H2O2 content resulted in 5.52 +/- 1.20 kgCO2 eq Climate change impact and 97.8 +/- 20.6 MJ of Resource use, fossil per kg of recycled WTB. The lowest quality fiber recovered in char, yet well separated from the matrix obtained at 250 degrees C and the lowest H2O2 content resulted in 0.0953 +/- 0.487 kgCO2 eq Climate change impact and 8.84 +/- 7.90 MJ of Resource use, fossil per kg of recycled WTB. The hot spot and sensitivity analysis indicated, that the oxidizer for the process - hydrogen peroxide, when acquired as a shelf product causes a significant burden on the whole process, with sensitivity ratios on the total impact indicators varying across the categories from 0.56 to 0.99. Substitution of H2O2 with theoretical 0-input oxidizer allowed to significantly lower environmental load of the recycling process, which in all of the analyzed scenarios presented environmental benefits compared to landfilling with recovery of the glass fiber and secondary chemicals.
引用
收藏
页数:15
相关论文
共 50 条
  • [21] Effects of core materials on the evolution of products during the pyrolysis of end-of-life wind turbine blades
    Xu, Ming-xin
    Ji, Hai-wen
    Meng, Xiang-xi
    Yang, Jie
    Wu, Ya-chang
    Di, Jin-yi
    Jiang, Hao
    Lu, Qiang
    JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 2023, 175
  • [22] State-of-the-art value chain roadmap for sustainable end-of-life wind turbine blades
    Lund, K. W.
    Madsen, E. S.
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2024, 192
  • [23] Critical review of current wind turbine blades' design and materials and their influence on the end-of-life management of wind turbines
    Martulli, L. M.
    Diani, M.
    Sabetta, G.
    Bontumasi, S.
    Colledani, M.
    Bernasconi, A.
    ENGINEERING STRUCTURES, 2025, 327
  • [24] Reinforced Wind Turbine Blades - An Environmental Life Cycle Evaluation
    Merugula, Laura
    Khanna, Vikas
    Bakshi, Bhavik R.
    ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2012, 46 (17) : 9785 - 9792
  • [25] Reinforced Wind Turbine Blades - An Environmental Life Cycle Evaluation
    Merugula, Laura
    Khanna, Vikas
    Bakshi, Bhavik R.
    ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2012, 46 (20) : 11484 - 11484
  • [26] Stiffness assessment of the laminate recovered from end-of-life wind turbine blade
    Pyrzowski, L.
    Sabik, A.
    Kluska, J.
    Zembrzuski, J.
    COMPOSITE STRUCTURES, 2024, 348
  • [27] Life cycle assessment of end-of-life vehicle recycling in China: a comparative study of environmental burden and benefit
    Chen Y.
    Ding Z.
    Liu J.
    Ma J.
    Int. J. Environ. Stud., 2019, 6 (1019-1040): : 1019 - 1040
  • [28] A comparative life cycle assessment of tyre recycling using pyrolysis compared to conventional end-of-life pathways
    Maga, Daniel
    Aryan, Venkat
    Bloemer, Jan
    RESOURCES CONSERVATION AND RECYCLING, 2023, 199
  • [29] Closing the loop of membranes by recycling end-of-life membranes: Comparative life cycle assessment and economic analysis
    Chen, Jiansuxuan
    Dai, Ruobin
    Wang, Zhiwei
    RESOURCES CONSERVATION AND RECYCLING, 2023, 198
  • [30] Data of the life cycle impact assessment and cost analysis of prospective direct recycling of end-of-life reverse osmosis membrane at full scale
    Senan-Salinas, Jorge
    Landaburu-Aguirre, Junkal
    Blanco, Alberto
    Garcia-Pacheco, Raquel
    Garcia-Calvo, Eloy
    DATA IN BRIEF, 2020, 33