An intelligent fault diagnosis method for rolling bearing using motor stator current signals

In the diagnosis of rolling bearing faults, the Motor Current Signature Analysis (MCSA) method offers advantages such as low cost, simplicity, and convenience compared to using vibration signals, temperature information, and other diagnostic objects. However, owing to the interference of high-frequency noise, power frequency, and its harmonics in current signals, which can severely affect the accuracy of bearing fault diagnosis, it is extremely challenging to use the original current signals during bearing faults directly for diagnostic purposes. Therefore, this paper proposes an intelligent fault diagnosis method based on the feature reconstruction (FR) method and convolutional neural networks (CNN). This method can achieve high-precision fault diagnosis using single-phase stator current signals from motors as the diagnostic objects. First, the FR method effectively removes the impact of high-frequency noise, supply frequency, and its harmonics from the current signals, while also highlighting subtle fault feature signals to a certain extent. Second, a CNN suitable for learning the characteristics of the current signals was constructed. Through feature extraction, learning, and classification of the current signal samples processed by the FR method, a diagnostic method with a high classification accuracy was obtained. Visualization techniques were used to present the final diagnosis results intuitively. The experimental results demonstrated the highest diagnostic accuracy and average diagnostic accuracy of the proposed method in diagnosing rolling bearing fault types, with an average diagnostic accuracy of approximately 99% for actual faulty bearing samples.