Position sensorless control of PMSM at overall speed with extended-EMF excited by speed and signal injection

被引:0
|
作者
Nimura T. [1 ]
Doki S. [1 ]
机构
[1] Nagoya University, Fro-cho, Chikusa-ku, Nagoya
关键词
Extended electromotive force; Overall speed; PMSMs; Position sensorless control; Signal injection;
D O I
10.1541/ieejias.140.589
中图分类号
学科分类号
摘要
Extended electromotive force (EEMF) estimation method is a representative method used for position sensorless control of PMSM in the middle/high speed range. EEMF enables position estimation by utilizing back-EMF and the saliency of inductance. The amplitude of EEMF is adjusted to maintain it above a certain voltage by using a signal injection, regardless of the rotor speed. Thus, EEMF can be used as a single position estimator to estimate overall speed range. Based on the validation of a EEMF control performance and a parameter sensitivity analysis, this paper presents a position sensorless control system configured with a single position estimator from startup to middle/high speed. The necessary adjustment parameter and control performance of the actual machine are also presented. © 2020 The Institute of Electrical Engineers of Japan.
引用
收藏
页码:589 / 596
页数:7
相关论文
共 50 条
  • [41] A zero speed operation sensorless PMSM drive without additional test signal injection
    Raute, Reiko
    Caruana, Cedric
    Cilia, Joseph
    Staines, Cyril Spiteri
    Sumner, Mark
    2007 EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-10, 2007, : 3469 - 3478
  • [42] An Improved Position-Sensorless Control Method at Low Speed for PMSM Based on High-Frequency Signal injection into a Rotating Reference Frame
    Wang, Shuang
    Yang, Kang
    Chen, Kang
    IEEE ACCESS, 2019, 7 : 86510 - 86521
  • [43] Research on PMSM Direct Torque Speed Control System with Speed Sensorless
    Sun, Xuxia
    Meng, Lin
    Liu, Yidong
    Wang, Kai
    PROCEEDINGS OF THE 2019 14TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA 2019), 2019, : 1824 - 1829
  • [44] Sensorless rotor position estimation of PMSM by full-order and sliding mode EMF observers with speed estimate
    Penn State Altoona, 3000 Ivyside Park, Altoona, PA, United States
    Int. J. Veh. Auton. Syst., 2013, 2-3 (157-189):
  • [45] PMSM position sensorless control with extended flux observer
    Imaeda, Yukitsugu
    Doki, Shinji
    Hasegawa, Masaru
    Matsui, Keiju
    Tomita, Mutuwo
    Ohnuma, Takumi
    IECON 2011: 37TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2011,
  • [46] Redundant position observer improvement for sensorless PMSM at low speed
    Gerard, B.
    Caux, S.
    Maussion, P.
    2006 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, VOLS 1-7, 2006, : 2083 - +
  • [47] UNIVERSAL PLL STRATEGY FOR SENSORLESS SPEED AND POSITION ESTIMATION OF PMSM
    el Murr, Georges
    Giaouris, Damian
    Finch, J. W.
    IEEE REGION 10 COLLOQUIUM AND THIRD INTERNATIONAL CONFERENCE ON INDUSTRIAL AND INFORMATION SYSTEMS, VOLS 1 AND 2, 2008, : 775 - 780
  • [48] Position Sensorless Direct Torque Control for PMSM Based on Pulse High Frequency Stator Flux Injection at Low Speed
    Lin, Xiaogang
    Huang, Wenxin
    Jiang, Wen
    2019 IEEE 28TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE), 2019, : 366 - 371
  • [49] Sliding-Mode Observer for Speed and Position Sensorless Control of Linear-PMSM
    Kazraji, Saeed Masoumi
    Soflayi, Ramin Bavili
    Sharifian, Mohammad Bagher Bannae
    ELECTRICAL CONTROL AND COMMUNICATION ENGINEERING, 2014, 5 (01) : 20 - 26
  • [50] A Model based Sliding Mode Observer applied in PMSM Sensorless Control for Speed and Position
    Ilioudis, Vasilios C.
    2017 25TH MEDITERRANEAN CONFERENCE ON CONTROL AND AUTOMATION (MED), 2017, : 921 - 926