Position sensorless control of PMSM at overall speed with extended-EMF excited by speed and signal injection

被引：0

作者：

Nimura T. ^{[1
]}

Doki S. ^{[1
]}

机构：

[1] Nagoya University, Fro-cho, Chikusa-ku, Nagoya

来源：

IEEJ Transactions on Industry Applications | 2020年 / 140卷 / 08期

关键词：

Extended electromotive force; Overall speed; PMSMs; Position sensorless control; Signal injection;

D O I：

10.1541/ieejias.140.589

中图分类号：

学科分类号：

摘要：

Extended electromotive force (EEMF) estimation method is a representative method used for position sensorless control of PMSM in the middle/high speed range. EEMF enables position estimation by utilizing back-EMF and the saliency of inductance. The amplitude of EEMF is adjusted to maintain it above a certain voltage by using a signal injection, regardless of the rotor speed. Thus, EEMF can be used as a single position estimator to estimate overall speed range. Based on the validation of a EEMF control performance and a parameter sensitivity analysis, this paper presents a position sensorless control system configured with a single position estimator from startup to middle/high speed. The necessary adjustment parameter and control performance of the actual machine are also presented. © 2020 The Institute of Electrical Engineers of Japan.

引用

下载

页码：589 / 596

页数：7

共 50 条

[1] The improvement of initial rotor position estimation method with Extended-EMF available at overall speed range by exciting with speed and signal injection
Kozakura, Takamasa
Nimura, Takumi
Doki, Shinji
2020 23RD INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2020, : 252 - 257
[2] Position Sensorless Control of IPMSM in Overall Speed Range by Extended EMF
Nimura, Takumi
Doki, Shinji
2019 21ST EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE '19 ECCE EUROPE), 2019,
[3] Influence of Speed EMF on Position Estimation Error in Carrier Signal Injection Based Sensorless Control of PMSM
Wang Jianmin
Gao Jianwei
2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012), 2012,
[4] Startability of PMSM with Pulsation Load in Speed and Position Sensorless Control Based on Extended EMF
Nishimura, Yuta
Inoue, Yukinori
Morimoto, Shigeo
Sanada, Masayuki
2020 23RD INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2020, : 1448 - 1453
[5] Initial Position Error Convergence of Position Sensorless Control of PMSM by using Extended Electromotive Force Excited by Signal Injection
Nimura, Takumi
Kondo, Shota
Doki, Shinji
Tomita, Mutuwo
2018 20TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE'18 ECCE EUROPE), 2018,
[6] An efficient evaluation of signal injection method for position sensorless control of IPMSMs based on an extended EMF model at low-speed range
Saito R.
Yamamoto T.
Doki S.
Ohnuma T.
IEEJ Transactions on Industry Applications, 2019, 139 (09): : 824 - 831
[7] Integration of HFSI and Extended-EMF Based Techniques for PMSM Sensorless Control in HEV/EV Applications
Lara, J.
Chandra, A.
Xu, J.
38TH ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2012), 2012, : 3688 - 3693
[8] PMSM Sensorless Control using Back-EMF Based Position and Speed Estimation Method
Driss, Youness Aite
Yousfi, Driss
PROCEEDINGS OF 2013 INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC), 2013, : 436 - 440
[9] MTPA based Sensorless Control of PMSM using Position and Speed Estimation by Back-EMF Method
Halder, Sukanta
Agarwal, Pramod
Srivastava, S. P.
2016 IEEE 6TH INTERNATIONAL CONFERENCE ON POWER SYSTEMS (ICPS), 2016,
[10] Low Speed Sensorless Control of PMSM Drive Using High Frequency Signal Injection
Agrawal, Jyoti
Bodkhe, Sanjay
2015 ANNUAL IEEE INDIA CONFERENCE (INDICON), 2015,

← 1 2 3 4 5 →