Research on spindle dynamic rotation-error-measurement technology

被引：0
|
作者：
Jin A. [1 ,2 ]
Miao Y.-X. [1 ,3 ]
Liu D.-D. [1 ,4 ]
Lin J. [1 ,2 ]
Jin P. [1 ,2 ]
Wang L. [1 ,2 ]
机构：
[1] Center of Ultra-Precision Optoelectronic Instrument, Harbin Institute of Technology, Harbin
[2] Key Lab of Ultra-precision Intelligent Instrumentation (Harbin Institute of Technology), Ministry of Industry and Information Technology, Harbin
[3] Beijing Aerospace Institute for Metrology and Measurement Technology, Beijing
[4] 92493 Army Metrology and Test Research Institute, Huludao
来源：
Guangxue Jingmi Gongcheng/Optics and Precision Engineering | 2020年 / 28卷 / 10期
关键词：
Dynamic parameter measurement; Precision measurement; Rotation error; Spindle; Target trajectory tracking;
D O I：
10.37188/OPE.20202810.2227
中图分类号：
学科分类号：
摘要：
High-speed electric spindle is a novel spindle that combines the drive and transmission units of the conventional spindle. The high-speed electric spindle is widely used in high-performance machining centers because of its high speed and high precision. The dynamic rotation characteristics of the spindle greatly determine the machining accuracy of the machining center; thus, it is an important factor that affects the overall performance of the machining center. The research is roughly divided into two types, namely, spindle rotation-error measurement based on displacement sensing and that based on optical methods. These measurement methods aim to determine the radial rotation error of the spindle by measuring the displacement change inthe spindle at a certain angle. These two measurementmethods exhibitgood measurement performancewhen the spindle is running at a low speed. However, when the spindle is operating at a high speed, measurement becomes difficult because of the limitation in the sampling frequency. According to the summary of the methods thatmeasure the spindle rotation error, we propose a measurement method for spindle dynamic rotation error based on target trajectory tracking. Finally, we summarize the existing technology and discuss future research prospects. © 2020, Science Press. All right reserved.
引用
收藏
页码：2227 / 2243
页数：16
相关论文
共 61 条
  • [41] ANANDAN K P, TULSIAN A S, DONMEZ A, Et al., A Technique for measuring radial error motions of ultra-high-speed miniature spindles used for micromachining, Precision Engineering, 36, 1, pp. 104-120, (2012)
  • [42] ANANDAN K P, OZDOGANLAR O B., An LDV-based methodology for measuring axial and radial error motions when using miniature ultra-high-speed (UHS) micromachining spindles, Precision Engineering, 37, 1, pp. 172-186, (2013)
  • [43] ANANDAN K P, OZDOGANLAR O B., Analysis of error motions of ultra-high-speed (UHS) micromachining spindles, International Journal of Machine Tools and Manufacture, 70, pp. 1-14, (2013)
  • [44] ANANDAN K P, OZDOGANLAR O B., A multi-orientation error separation technique for spindle metrology of miniature ultra-high-speed spindles, Precision Engineering, 43, pp. 119-131, (2016)
  • [45] GARINEI A, MARSILI R., Design of an optical measurement system for dynamic testing of electrospindles, Measurement, 46, 5, pp. 1715-1721, (2013)
  • [46] KAVITHA C, ASHOK S D., A new approach to spindle radial error evaluation using a machine vision system, Metrology and Measurement Systems, 24, 1, pp. 201-219, (2017)
  • [47] LOU ZH F, HAO X P, LIU L, Et al., Spindle radial motion error measurement using a circular grating and a autocollimator, Opt. Precision Eng, 27, 9, pp. 2053-2061, (2019)
  • [48] TU J F, BOSSMANNS B, HUNG S C C., Modeling and error analysis for assessing spindle radial error motions, Precision Engineering, 21, 2, pp. 90-101, (1997)
  • [49] HE Q X, ZHANG H R, YANG J., Analysis of the precision gyration of the spindle supporting magnetic bearings, Mechanical Science and Technology, 18, 4, pp. 3-5, (1999)
  • [50] HONG M SH, WEI Y L, LI J SH., Unified theory of one-dimension and multi-dimension error separation techniques, China Mechanical Engineering, 11, 3, pp. 245-248, (2000)
1234567