Modeling and compensation of machining errors for large structural parts considering thermal deformation

被引：0

作者：

Zhang P. ^{[1
]}

Li H. ^{[1
]}

Deng M. ^{[1
]}

Du Z. ^{[1
]}

Yang J. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai

来源：

Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2019年 / 51卷 / 07期

关键词：

Error compensation; Error modeling; Gantry machining center; Positioning error; Thermal deformation of workpiece;

D O I：

10.11918/j.issn.0367-6234.201807215

中图分类号：

学科分类号：

摘要：

To decrease the machining error of large structural parts, a comprehensive error model considering thermal deformation was established based on thermal characteristics analysis, and the error compensation verification was carried out. The mechanism of thermal deformation caused by the temperature change of the grating scale was analyzed and the nonlinear temperature variation law of the grating scale was studied by heat flux. The geometric error and thermal error of gantry machining center were modeled separately and superimposed to generate a compound error model. A linear model between the thermal deformation and the temperature change of the workpiece and a comprehensive error model considering the thermal deformation were established. The relationship between the compound error and the thermal deformation of workpiece in the machining process was analyzed. The innovative real-time compensation system was applied by the external mechanical origin offset function of the CNC system, and the error compensation of the gantry machining center was realized. The results show that the compound error model has high prediction accuracy when the machine tool error is only considered, but it cannot be applied to the machining process of aerospace structures with large thermal deformation. The comprehensive error model has a good effect on the machining process of large torque arm, which increases machining positioning accuracy by at least 52%. © 2019, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.

引用

页码：82 / 88

页数：6

共 15 条

[11] Feng W., Huang Y., Tuo Z., Et al., Modeling of thermally induced grating positioning error of large machine tools based on temperature integral method and real-time compensation, Journal of Shanghai Jiaotong University, 50, 5, (2016)
[12] Cao H., Zhu L., Li X., Et al., Thermal error compensation of dry hobbing machine tool considering workpiece thermal deformation, International Journal of Advanced Manufacturing Technology, 86, 5-8, (2016)
[13] Sun Z., Hou R., Tao T., Et al., Comprehensive thermal error modeling for NC lathe in engineering application, Journal of Harbin Institute of Technology, 1, (2016)
[14] Feng W.L., Yao X.D., Azamata, Et al., Straightness error compensation for large CNC gantry type milling centers based on B-spline curves modeling, International Journal of Machine Tools & Manufacture, 88, (2015)
[15] Jiang H., Yang J., Li Z., Et al., Application of real time compensation with combinative thermal error prediction model based on error separation on CNC machine tools, Journal of Shanghai Jiaotong University, 47, 5, (2013)

← 1 2 →