Axial compressive behavior of CFRP uniformly wrapped coal in circular columns

被引：0

作者：

Li Q. ^{[1
]}

Hu L. ^{[1
]}

Cao H. ^{[1
]}

Zeng X. ^{[1
]}

Gao S. ^{[1
]}

Zhu Q. ^{[1
]}

Liu Y. ^{[1
]}

Yu M. ^{[1
]}

Huang X. ^{[1
]}

机构：

[1] School of Civil and Architectural Engineering, Liaoning University of Technology, Jinzhou

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2022年 / 39卷 / 11期

关键词：

CFRP; Confined coal columns; Strength enhancement ratio; Strength model; Uniform confinement;

D O I：

10.13801/j.cnki.fhclxb.20211201.001

中图分类号：

学科分类号：

摘要：

To facilitate the practical application of fiber-reinforced polymer (FRP) strengthened structures and improve the bearing capacity and deformation capacity of coal pillar in goaf, the mechanical performance of carbon fiber-reinforced polymer (CFRP) uniformly wrapped coal columns under axial compression was explored. Test results show that its state is basically unchanged and the fracture position is about 0.25-0.5 times the height of CFRP confined coal columns, and the axial deformation capacity is increased by at least 1.5 times when the coal columns are damaged since the uniform confinement of CFRP. The peak strength of single and double CFRP confined coal columns is increased by 3.56-6.34 times and 6.33-11.21 times, respectively. When the number of CFRP layers is the same, the strength enhancement ratio of CFRP confined coal columns decreases gradually with the increase of loading rate, and the decrease trend becomes more significant with the increase of the number of CFRP layers. The effect of CFRP layers on peak strength is more significant than that of loading rate, but it is obviously the opposite as for the failure time. It has been obtained that the 3D visualized mapping function of strength enhancement ratio considering loading rate and number of CFRP layers. The modified Richart strength model of CFRP confined coal columns has been established, and the index of integral absolute error shows that the model has good performance and higher precision. © 2022, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

引用

页码：5611 / 5624

页数：13

共 50 条

[41] LI Qingwen, YANG Hao, DONG Fanghong, Et al., FRP device for quickly reinforcing small coal pillar
[42] Suggested methods for determining tensile strength of rock materials[J], International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 15, 1, pp. 99-103, (1978)
[43] Methods for determining the physical and mechanical properties of coal and rock: GB/T 23561-2010, (2010)
[44] Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials: GB/T 3354-2014, (2014)
[45] XIAO W J, ZHANG D M, CAI Y, Et al., Study on loading rate dependence of the coal failure process based on uniaxial compression test[J], Pure and Applied Geophysics, 177, pp. 4925-4941, (2020)
[46] JING Denghu, Researches on model of stress-strain and applications in rehabilitation for concrete confined by FRP, (2006)
[47] LIM J C, OZBAKKALOGLU T., Lateral strain-to-axial strain relationship of confined concrete, Journal of Structural Engineering, 141, 5, (2015)
[48] FERROTTO M F, FISCHER O, CAVALERI L., Analysis-oriented stress-strain model of CRFP-confined circular concrete columns with applied preload, Materials and Structures, 51, 2, pp. 1-16, (2018)
[49] WU Y F, ZHOU Y W., Unified strength model based on Hoek-Brown failure criterion for circular and square concrete columns confined by FRP[J], Journal of Composites for Construction, 14, 2, pp. 175-184, (2010)
[50] ZHANG Y, LU Z F, CAO Y G., Unified strength model based on the Hoek-Brown failure criterion for fibre-reinforced polymer-confined pre-damaged concrete columns with circular and square cross sections[J], Journal of Central South University, 27, 12, pp. 3807-3820, (2020)

← 1 2 3 4 5 →