Design for Producibility: A Case Study on Theory, Practice and Gaps

Changing customer requirements, regulations, technology and regulations, shift to automated assembly and product variety are common challenges faced by many manufacturing industries and alignment between product and production system is critical for business success. Design engineers should be aware of production constraints and capabilities to ensure efficient manufacture and assembly of products that are developed. This requires different and detailed support to guide the work, evaluate different design solutions, enable continuous and concurrent work with design for producibility and production preparation. A study was conducted in three companies to understand alignment and integration of product development and production preparation processes. Also, utilization of production requirements, design for manufacture and assembly (DFMA) and failure modes and effect analysis (FMEA) to support design for producibility (DFP) was studied. Currently, production preparation is done through discussions between design and production engineers. Production preparation and work with DFMA and FMEA is skill and experience dependent. Definition, structuring and sharing of production requirements on different system levels, from production and product perspectives are identified as critical to supporting design for producibility and production preparation. The work with FMEA and DFMA can be developed and improved with systematic and structured way of working with production requirements.