A Comprehensive Study on Microstructure and Wear Behavior of Nano-WC Reinforced Ni60 Laser Coating on 17-4PH Stainless Steel

被引:1
|
作者
Wang, Jie [1 ]
Zhang, Xiaoqiang [1 ]
Qiao, Lei [1 ]
Zhao, Yue [1 ]
Ren, Mengfei [1 ]
Li, Tiaotiao [1 ]
Li, Ruifeng [1 ]
机构
[1] Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang 212000, Peoples R China
关键词
laser cladding; microstructure; wear mechanism; composite coating; TRIBOLOGICAL PROPERTIES; PARTICLES;
D O I
10.3390/coatings14040484
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The surface of 17-4PH martensitic stainless steel was laser-cladded with Ni60 and Ni60+nano-WC composites and a comprehensive investigation was conducted of the microstructure and wear mechanism. The findings demonstrate that despite the added nano-WC particles being fused and dissolved during laser cladding, they still lead to a reduction in grain size and a decrease in crystallographic orientation strength. Furthermore, the dissolution of nano-WC makes the lamellar M23C6 carbides transform into a rod or block morphology, and leads to the CrB borides becoming finer and more evenly dispersed. This microstructural evolution resulted in a uniform increase in hardness and wear resistance, effectively preventing crack formation. When the nano-WC addition increased to 20 wt.%, there was a 27.12% increase in microhardness and an 85.19% decrease in volume wear rate compared to that of the pure Ni60 coating. Through analysis of the microstructure and topography of wear traces, it can be inferred that as the nano-WC addition increased from 0 wt.% up to 20 wt.%, there was a gradual transition from two-body abrasive wear to three-body abrasive wear, ultimately resulting in adherent wear.
引用
收藏
页数:15
相关论文
共 50 条
  • [31] Experimental Study of Build Orientation in Direct Metal Laser Sintering of 17-4PH Stainless Steel
    Shehata, Mohamed
    Hatem, Tarek M.
    Samad, Wael A.
    3D PRINTING AND ADDITIVE MANUFACTURING, 2019, 6 (04) : 227 - 233
  • [32] Microstructure and Wear Behavior of Hard Ni60 and Soft WC-12Co/Ni25 Coatings Prepared by Laser Cladding on W1813N Non-magnetic Stainless Steel
    Yang, Lijing
    Zhang, Pingxiang
    Wang, Shaopeng
    Li, Zhengxian
    Wang, Pei
    Li, Huan
    Yang, Haiyu
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (11): : 3441 - 3447
  • [33] Effects of heat treatment on the nano-indentation, corrosion and cavitation erosion behavior of 17-4PH stainless steel by laser surface melting
    Yu, D. T.
    Wu, C. L.
    Zhang, S.
    Zhang, C. H.
    Chen, H. T.
    Tao, X. P.
    SURFACE & COATINGS TECHNOLOGY, 2024, 484
  • [34] Selective laser melting of Nano-TiN reinforced 17-4 PH stainless steel: Densification, microstructure and mechanical properties
    Ozsoy, Andac
    Aydogan, Eda
    Dericioglu, Arcan F.
    Materials Science and Engineering: A, 2022, 836
  • [35] Selective laser melting of Nano-TiN reinforced 17-4 PH stainless steel: Densification, microstructure and mechanical properties
    Ozsoy, Andac
    Aydogan, Eda
    Dericioglu, Arcan F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 836
  • [36] Effects of multiple laser shock peening impacts on microstructure and wear performance of wire-based laser directed energy deposition 17-4PH stainless steel
    Li, Nan
    Wang, Qiang
    Niu, Wenjuan
    Zhou, Liucheng
    Han, Peng
    Han, Yu
    Li, Jiaxu
    Song, Pu
    Hu, Ning
    Guo, Nan
    Li, Shenao
    Pan, Xinlei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 : 3222 - 3227
  • [37] Laser cladding of Ni60/WC/TiN composite coatings on 00Cr13Ni4Mo hydro turbine blade stainless steel for improvement of wear resistance
    Huang, Kaijin
    Jiang, Huarui
    Lin, Xin
    FRONTIERS OF ADVANCED MATERIALS AND ENGINEERING TECHNOLOGY, PTS 1-3, 2012, 430-432 : 101 - +
  • [38] Microstructure and High Temperature Wear Resistance of Laser Cladding NbC/Ni60 Composite Coating on H13 Die Steel
    Chang Q.
    Ren L.
    Liu Y.
    Xie Y.
    Li W.
    Surface Technology, 2024, 53 (05): : 108 - 114
  • [39] Study on the friction and wear performance of laser cladding WC-TiC/Ni60 coating on the working face of shield bobbing cutter
    Zhu, Yeqi
    Shen, Shikai
    Yang, Xuefeng
    Song, Fei
    Dong, Wenlong
    Wang, Zhiyuan
    Wu, Min
    OPTICAL MATERIALS, 2024, 148
  • [40] Study on high-cycle fatigue behavior of laser-cladding Stellite6 on 17-4PH stainless steel
    Zhao, Wenyu
    Lu, Fenggui
    Li, Zhuguo
    Wang, Dong
    Wang, Xiaojuan
    Liu, Xia
    Yang, Renjie
    Zhao, Wenyu, 1600, Science Press (41):