A Comprehensive Study on Microstructure and Wear Behavior of Nano-WC Reinforced Ni60 Laser Coating on 17-4PH Stainless Steel

被引:1
|
作者
Wang, Jie [1 ]
Zhang, Xiaoqiang [1 ]
Qiao, Lei [1 ]
Zhao, Yue [1 ]
Ren, Mengfei [1 ]
Li, Tiaotiao [1 ]
Li, Ruifeng [1 ]
机构
[1] Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang 212000, Peoples R China
关键词
laser cladding; microstructure; wear mechanism; composite coating; TRIBOLOGICAL PROPERTIES; PARTICLES;
D O I
10.3390/coatings14040484
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The surface of 17-4PH martensitic stainless steel was laser-cladded with Ni60 and Ni60+nano-WC composites and a comprehensive investigation was conducted of the microstructure and wear mechanism. The findings demonstrate that despite the added nano-WC particles being fused and dissolved during laser cladding, they still lead to a reduction in grain size and a decrease in crystallographic orientation strength. Furthermore, the dissolution of nano-WC makes the lamellar M23C6 carbides transform into a rod or block morphology, and leads to the CrB borides becoming finer and more evenly dispersed. This microstructural evolution resulted in a uniform increase in hardness and wear resistance, effectively preventing crack formation. When the nano-WC addition increased to 20 wt.%, there was a 27.12% increase in microhardness and an 85.19% decrease in volume wear rate compared to that of the pure Ni60 coating. Through analysis of the microstructure and topography of wear traces, it can be inferred that as the nano-WC addition increased from 0 wt.% up to 20 wt.%, there was a gradual transition from two-body abrasive wear to three-body abrasive wear, ultimately resulting in adherent wear.
引用
收藏
页数:15
相关论文
共 50 条
  • [1] Microstructure and Friction and Wear Property of Nano-WC Reinforced Ni-Based Coating
    Shu Da
    Cui Xiangxiang
    Li Zhuguo
    Sun Jichao
    Wang Gang
    Si Wudong
    Dai Sichao
    Chen Xu
    LASER & OPTOELECTRONICS PROGRESS, 2020, 57 (21)
  • [2] Laser Repair With Addition of Nano-WC on Microstructure and Fracture Behavior of 304 Stainless Steel
    Jiang, Wei
    Jiang, Xianfeng
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2017, 139 (04):
  • [3] Effect of multiple laser shock peening on the microstructure and properties of laser cladding nano-WC/Ni60 composite coatings
    Chen, Chunlun
    Feng, Aixin
    Wei, Yacheng
    Wang, Yu
    Pan, Xiaoming
    Song, Xiangyu
    OPTICS AND LASER TECHNOLOGY, 2023, 167
  • [4] Microstructure and hardness investigation of 17-4PH stainless steel by laser quenching
    Chen, Zhaoyun
    Zhou, Guijuan
    Chen, Zhonghua
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 : 536 - 541
  • [5] Effects of WC particles on microstructure and wear behavior of laser cladding Ni60 composite coatings
    Chen, Chunlun
    Feng, Aixin
    Wei, Yacheng
    Wang, Yu
    Pan, Xiaoming
    Song, Xiangyu
    OPTICS AND LASER TECHNOLOGY, 2023, 163
  • [6] Hot corrosion behavior of a NiCoCrAlY coating fabricated by laser cladding on 17-4PH stainless steel
    Li, Yuxin
    Yang, Yixin
    Nie, Jinhao
    Bai, Peikang
    Liang, Zhiguo
    Wei, Shouzheng
    Cai, Jie
    Guan, Qingfeng
    ENGINEERING FAILURE ANALYSIS, 2022, 133
  • [7] Corrosive wear behavior in the strong alkaline solution for the WC/Ni60 composite coating by laser cladding
    Zhang, San-Chuan
    Li, Xia
    Zhang, Jing
    Guangdianzi Jiguang/Journal of Optoelectronics Laser, 2010, 21 (11): : 1663 - 1667
  • [8] Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel
    Lin, Xin
    Cao, Yongqing
    Wu, Xiaoyu
    Yang, Haiou
    Chen, Jing
    Huang, Weidong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 553 : 80 - 88
  • [9] Effects of Temperature on Microstructure and Wear of Salt Bath Nitrided 17-4PH Stainless Steel
    Jun Wang
    Yuanhua Lin
    Hongyuan Fan
    Dezhi Zeng
    Qian Peng
    Baoluo Shen
    Journal of Materials Engineering and Performance, 2012, 21 : 1708 - 1713
  • [10] Effects of Temperature on Microstructure and Wear of Salt Bath Nitrided 17-4PH Stainless Steel
    Wang, Jun
    Lin, Yuanhua
    Fan, Hongyuan
    Zeng, Dezhi
    Peng, Qian
    Shen, Baoluo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (08) : 1708 - 1713