Brushless doubly fed generator fault ride-through strategy

被引：0
|
作者：
Wang Y.-D. [1 ]
Su J.-H. [1 ]
Wang H.-N. [1 ]
Yu H.-R. [1 ]
机构：
[1] Research Center for Photovoltaic System Engineering of Ministry of Education, Hefei University of Technology, Hefei
来源：
Dianji yu Kongzhi Xuebao/Electric Machines and Control | 2021年 / 25卷 / 02期
关键词：
Brushless doubly fed generator; Damping characteristic; Fault ride-through; Positive and negative rotating reference frame; Symmetrical grid fault; Virtual resistance;
D O I：
10.15938/j.emc.2021.02.004
中图分类号：
学科分类号：
摘要：
When the grid voltage fails, it will impact the generator stator, rotor voltage and current, and will affect the grid security. In order to study the characteristics of brushless doubly-fed generators during grid faults and design the corresponding control strategies, this paper analyzes the equivalent model and damping characteristics of the control windings of brushless doubly-fed generator, and proposes a control strategy of introducing virtual resistance into the current inner loop controller, which can effectively suppress the oscillation of the voltage and current transient response of the control winding and speed up the response time. For asymmetrical faults, the influence of each component was analyzed, the positive and negative sequence rotating reference frames were introduced, the negative sequence component in the control target was eliminated, which ensure uninterrupted operation of the unit during the fault. Simulations and experiments show that brushless doubly-fed motors can be passed through a grid fault without a crowbar circuit. © 2021, Harbin University of Science and Technology Publication. All right reserved.
引用
下载
收藏
页码：28 / 36
页数：8
相关论文
共 15 条
  • [1] CHENG Ming, HAN Peng, WEI Xinchi, Design, analysis and control of brushless doubly-fed generators for wind power application, Transactions of China Electrotechnical Society, 31, 19, (2016)
  • [2] WANG Xuefan, A new brushless doubly-fed machine with a wound-rotor changing-pole winding, Proceedings of the CSEE, 23, 6, (2003)
  • [3] HUANG Changxi, YANG Shuying, KAN Chaohao, Design optimization of brushless doubly-fed generator with wound-rotor in the form of star-delta, Micromotors, 46, 9, (2013)
  • [4] CHEN Xin, WANG Xuefan, Excitation control and performance analysis for BDFIG-based ship stand-alone power generation system, Transactions of China Electrotechnical Society, 32, 3, (2017)
  • [5] JIA Le, WANG Xuefan, XIONG Fei, Design and test of a 700 kW ship shaft brushless doubly fed generator, Transactions of China Electrotechnical Society, 31, 15, (2016)
  • [6] TOHIDI S, ORAEE H, ZOLGHADRI M R, Et al., Analysis and enhancement of low-voltage ride-through capability of brushless doubly fed induction generator, IEEE Transactions on Industrial Electronics, 60, 3, (2013)
  • [7] LONG T, SHAO S, MALLIBAND P, Et al., Crowbarless fault ride-through of the brushless doubly fed induction generator in a wind turbine under symmetrical voltage dips, IEEE Transactions on Industrial Electronics, 60, 7, (2013)
  • [8] ZHANG A L, CHEN Z F, GAO R Z, Et al., Crowbarless symmetrical low-voltage ride through based on flux linkage tracking for brushless doubly fed induction generators, IEEE Transactions on Industrial Electronics, 69, 9, (2020)
  • [9] LONG T, SHAO S, ABDI E, Et al., Asymmetrical low-voltage ride through of brushless doubly fed induction generators for the wind power generation, IEEE Transactions on Energy Conversion, 28, 3, (2013)
  • [10] CHEN J S, ZHANG W, CHEN B J, Et al., Improved vector control of brushless doubly fed induction generator under unbalanced grid conditions for offshore wind power generation[J], IEEE Transactions on Energy Conversion, 31, 1, (2016)
12