Effect of Substrate Preheating, Remelting, In-situ Presintering on Crack Formation of Ti-47Al-2Cr-2Nb Fabricated by Selective Laser Melting

被引：0
|
作者：
Shi, Xuezhi [1 ]
Huang, Yunfeng [1 ]
Li, Zhenhua [1 ]
Feng, Wuwei [1 ]
Ma, Shuyuan [2 ]
机构：
[1] School of Marine Engineering Equipment, Zhejiang Ocean University, Zhoushan,316022, China
[2] School of Mechanical Engineering, Beijing Institute of Technology, Beijing,100081, China
来源：
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2022年 / 51卷 / 08期
基金：
中国国家自然科学基金;
关键词：
Aluminum alloys - Chromium alloys - Niobium alloys - Preheating - Surface properties - Titanium alloys;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The methods of substrate preheating, remelting and in-situ presintering were proposed to fabricate Ti-47Al-2Cr-2Nb by selective laser melting (SLM). The effects of these approaches on the formation of cracks and surface quality were investigated. The results indicate that substrate preheating, remelting and in-situ presintering powder can reduce the formation of cracks to a certain extent, and the density is increased by 1.71%~4.34%. Remelting contributes to improvement of the surface quality but greatly reduces the productivity. In addition, the combination of substrate preheating and in-situ presintering can effectively prevent the occurrence of cracks, and the density is over 99%. Copyright © 2022, Northwest Institute for Nonferrous Metal Research. Published by Science Press. All rights reserved.
引用
收藏
页码：2739 / 2744
相关论文
共 50 条
  • [41] High cycle fatigue behaviour of Ti-47Al-2Cr-2Nb and Ti-6242S with (Al,Cr)3Ti plasma spray protective coating
    Wood, TD
    Dewald, DK
    Mikkola, DE
    SURFACE ENGINEERING, 1999, 15 (04) : 335 - 339
  • [42] TENSILE AND HIGH CYCLE FATIGUE PROPERTIES OF Ti-47Al-2Cr-2Nb DIRECTIONALLY SOLIDIFIED BY COLD CRUCIBLE METHOD
    Ding Hongsheng
    Shang Zibo
    Wang Yongzhe
    Chen Ruirun
    Guo Jingjie
    Fu Hengzhi
    ACTA METALLURGICA SINICA, 2015, 51 (05) : 569 - 579
  • [43] Microstructure and oxidation behavior of a SiC-Al2O3-glass composite coating on Ti-47Al-2Cr-2Nb alloy
    Li, Wenbo
    Chen, Minghui
    Wu, Mingyu
    Zhu, Shenglong
    Wang, Cheng
    Wang, Fuhui
    CORROSION SCIENCE, 2014, 87 : 179 - 186
  • [44] Preparation and oxidation behavior of SiO2-Al2O3-glass composite coating on Ti-47Al-2Cr-2Nb alloy
    Li, Wenbo
    Chen, Minghui
    Wang, Cheng
    Zhu, Shenglong
    Wang, Fuhui
    SURFACE & COATINGS TECHNOLOGY, 2013, 218 : 30 - 38
  • [45] Microstructural control and mechanical properties of Ti-47Al-2Cr-2Nb alloy by directional solidification electromagnetic cold crucible technique
    Nie, Ge
    Ding, Hongsheng
    Chen, Ruirun
    Guo, Jingjie
    Fu, Hengzhi
    MATERIALS & DESIGN, 2012, 39 : 350 - 357
  • [46] INTERACTION BETWEEN Ti-47Al-2Cr-2Nb ALLOY AND Y2O3 CERAMIC DURING DIRECTIONAL SOLIDIFICATION
    Zhang Huarui
    Gao Ming
    Tang Xiaoxia
    Zhang Hu
    ACTA METALLURGICA SINICA, 2010, 46 (07) : 890 - 896
  • [47] 铸态Ti-47Al-2Cr-2Nb合金热变形行为与组织性能研究
    胡志军
    张嘉恒
    胡志力
    庞秋
    精密成形工程, 2024, 16 (11) : 126 - 134
  • [48] Effect of Substrate Material on the Microstructure, Texture, Phase and Microhardness of a Ti-48Al-2Cr-2Nb Alloy Processed by Laser Melting Deposition
    基板材料对激光熔化沉积制造Ti-48Al-2Cr-2Nb合金组织, 织构, 相和显微硬度的影响
    Xu, Guojian (xuguojian1959@qq.com), 2020, Science Press (49): : 2262 - 2268
  • [49] Effect of Substrate Material on the Microstructure, Texture, Phase and Microhardness of a Ti-48Al-2Cr-2Nb Alloy Processed by Laser Melting Deposition
    Liu Zhanqi
    Ma Ruixin
    Wang Wenbo
    Xu Guojian
    Su Yunhai
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (07) : 2262 - 2268
  • [50] Simulation of Cooling Rate Effects on Ti-48Al-2Cr-2Nb Crack Formation in Direct Laser Deposition
    Yan, Lei
    Li, Wei
    Chen, Xueyang
    Zhang, Yunlu
    Newkirk, Joe
    Liou, Frank
    Dietrich, David
    JOM, 2017, 69 (03) : 586 - 591
12345