Numerical analysis on droplet size characteristics of flashing spray under different spraying conditions

被引：0
|
作者：
Ke B. [1 ]
Gao P. [1 ]
Wang B. [1 ]
Li R. [1 ]
Lu C. [2 ]
Tian R. [1 ]
机构：
[1] Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin
[2] Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu
来源：
Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University | 2020年 / 41卷 / 08期
关键词：
Droplet breakup; Droplet size; Flashing spray; Nozzle diameter; Numerical calculation; Spray distance; Spray pressure;
D O I：
10.11990/jheu.201905071
中图分类号：
学科分类号：
摘要：
This study investigated the effect of different spray conditions on the droplet characteristics of flash spray. The characteristics of droplet size of flashing spray under different spraying conditions were analyzed using the effervescent injection model and the KHRT breakup model in the FLUENT discrete phase model of computational fluid dynamics software. The variation in droplet size under different conditions was analyzed. Results show that the average diameter of the spray droplets increases with increasing initial pressure of the spray fluid, and the trend gradually becomes slower. With the increase in diameter of the spray injection, the average diameter of the spray droplets initially increases and then decreases, and the trend becomes more obvious with the increase in the downstream distance of the spray. As the downstream distance increases, the average diameter of the droplets initially becomes smooth and then sharply increases. Copyright ©2020 Journal of Harbin Engineering University.
引用
收藏
页码：1170 / 1175
页数：5
相关论文
共 17 条
  • [11] JIN Y I, LEE H J, HWANG K Y, Et al., Flashing injection of high temperature hydrocarbon liquid jets[J], Experimental thermal and fluid science, 90, pp. 200-211, (2018)
  • [12] BEALE J C, REITZ R D., Modeling spray atomization with the Kelvin-Helmholtz/Rayleigh-Taylor hybrid model, Atomization and sprays, 9, 6, pp. 623-650, (1999)
  • [13] SCALA F., Fluidized bed technologies for near-zero emission combustion and gasification, (2013)
  • [14] LIU Jing, XU Xu, The research development of liquid jet atomization in high speed crossflow, Advances in mechanics, 39, 3, pp. 273-283, (2009)
  • [15] O'ROURKE P J, AMSDEN A A., The TAB method for numerical calculation of spray droplet breakup, (1987)
  • [16] JIANG Yong, FAN Weicheng, LIAO Guangxuan, Et al., Study on instability breakup of fluid droplet in spray process, Fire safety science, 9, 3, pp. 1-5, (2000)
  • [17] CLEARY V, BOWEN P, WITLOX H., Flashing liquid jets and two-phase droplet dispersion:I. Experiments for derivation of droplet atomisation correlations[J], Journal of hazardous materials, 142, 3, pp. 786-796, (2007)
12