Progress on Polylactic Acid Supercritical CO2 Bead Foaming

被引：0
|
作者：
Song C. [1 ]
Zhang R. [1 ]
Xu C. [1 ]
Liu Q. [1 ]
Fu X. [1 ]
Hu S. [1 ]
机构：
[1] Hubei Provincial Key Laboratory of Green Materials for Light Industry, Hubei University of Technology, Wuhan
来源：
Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering | 2020年 / 36卷 / 05期
关键词：
Bead foaming; Polylactic acid; Supercritical CO[!sub]2[!/sub;
D O I：
10.16865/j.cnki.1000-7555.2020.0111
中图分类号：
学科分类号：
摘要：
Polylactic acid (PLA) is a new type of environmentally and friendly plastic with good performance, and its expanded beads not only have the advantages of wide source, complete degradability of PLA raw materials, excellent comprehensive mechanical properties, but also show high performance through its microcellular foam structure. Advanced application standards require reduced material usage, energy savings, environmental-friendly and many other benefits. In this paper, the foaming properties, cell regulation, crystallization control and process conditions of polylactic acid beads at home and abroad were reviewed. The composite modification methods of polylactic acid completely and incompletely degradable systems were summed up and finished. The existing problems have been put forward, the advantages and disadvantages of different process conditions were compared. The future research on polylactic acid bead foaming technology was prospected. © 2020, Editorial Board of Polymer Materials Science & Engineering. All right reserved.
引用
收藏
页码：167 / 174
页数：7
相关论文
共 32 条
  • [11] Bernardo V, Martin-de Leon J, Laguna-Gutierrez E, Et al., Understanding the role of MAM molecular weight in the production of PMMA/MAM nanocellular polymers, Polymer, 153, pp. 262-270, (2018)
  • [12] Kuang T, Chen F, Chang L, Et al., Facile preparation of open- cellular porous poly (L-lactic acid) scaffold by supercritical carbon dioxide foaming for potential tissue engineering applications, Chemical Engineering Journal, 307, pp. 1017-1025, (2016)
  • [13] Nofar M, Tabatabaei A, Sojoudiasli H, Et al., Mechanical and bead foaming behavior of PLA-PBATand PLA-PBSAblends with different morphologies, European Polymer Journal, 90, pp. 231-244, (2017)
  • [14] Ong Y X J, Lee L Y, Davoodi P, Et al., Production of drug-releasing biodegradable microporous scaffold using a two-step micro-encapsulation/supercritical foaming process, Journal of Supercritical Fluids, Supercrit. Fluids, 133, pp. 263-269, (2018)
  • [15] Wang G, Wang L, Mark L H, Et al., Ultralow-threshold and lightweight biodegradable porous PLA/MWCNT with segregated conductive networks for high-performance thermal insulation and electromagnetic interference shielding applications, Acs Applied Materials & Interfaces, 10, pp. 1195-1203, (2018)
  • [16] Yang J N, Li P., Characterization of short glass fiber reinforced polypropylene foam composites with the effect of compatibilizers
  • [17] a comparision, Journal of Reinforced Plastics & Composites, 34, pp. 534-546, (2015)
  • [18] Sun H, Hu J, Bai X, Et al., Largely improved toughness of poly(lactic acid) by unique electrospun fiber network structure of thermoplastic polyurethane, Polymer Testing, 64, pp. 250-253, (2017)
  • [19] Huang A, Kharbas H, Ellingham T, Et al., Mechanical properties, crystallization characteristics, and foaming behavior of polytetrafluoroethylene-reinforced poly(lactic acid) composites, Polymer Engineering & Science, 57, pp. 570-580, (2017)
  • [20] Huang A, Wang H K, Peng X F, Et al., Polylactide/thermoplastic polyurethane/polytetrafluoroethylene nanocomposites with in situ fibrillated polytetrafluoroethylene and nanomechanical properties at the interface using atomic force microscopy, Polymer Testing, 67, pp. 22-30, (2018)
1234