Shaking table test of saturated fine sand liquefaction under strong earthquake

被引：0
|
作者：
Feng Z. [1 ]
Dong Y. [1 ,2 ]
He J. [1 ]
Liu C. [3 ]
Zhang F. [3 ]
Li X. [4 ]
机构：
[1] School of Highway, Chang'an University, Xi'an
[2] School of Civil Engineering, Longdong University, Qingyang, 745000, Gansu
[3] Department of Transport of Hainan Province, Haikou, 570216, Hainan
[4] School of Geographic Information and Tourism, Chuzhou University, Chuzhou, 239000, Anhui
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2019年 / 51卷 / 09期
关键词：
Discriminant method; Liquefaction; Meizoseismal area; Pore pressure ratio; Saturated fine sand; Shaking table test;
D O I：
10.11918/j.issn.0367-6234.201810154
中图分类号：
学科分类号：
摘要：
Aiming at liquefaction of saturated fine sand in meizoseismal area and taking the Puqian Bridge project as the test site, this study simulated the vibration response of the free field under seismic action by the vibration table model test and the laminated shear model box. The variation law of pore pressure ratio of saturated fine sand at different depths under ground vibration intensity of 0.15g~0.80g (g represents gravity acceleration) was analyzed, and the liquefaction discrimination method of saturated fine sand was discussed. Results show that the growth of ultra-quiet pore water pressure and pore pressure ratio of saturated fine sand lagged behind ground motion stress, and the deeper the sand was, the longer the lag time. The saturated fine sand with a depth of 5 cm, 60 cm, and 110 cm was liquefied when the local vibration intensity was greater than or equal to 0.15g, 0.20g, and 0.25g respectively, and the pore pressure ratio stability value was greater than or equal to 0.8, which was proposed as a critical pore pressure ratio of saturated fine sand liquefaction. The liquefaction determination results of the existing common methods were discussed and a new method for discriminating the liquefaction of saturated fine sand by the criterion of saturated fine sand depth, ground motion intensity, and pore pressure ratio was proposed. It provides technical reference for similar projects and scientific basis for rational design and construction of bridge foundation before paving. © 2019, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
收藏
页码：186 / 192
页数：6
相关论文
共 19 条
  • [1] Feng Z., Foundation Engineering in Special Areas, (2008)
  • [2] Wang J., Wang L., Li L., Thedynamic triaxial test discrimination and evaluation for liquefaction of saturated sand, Northwestern Seismological Journal, 26, 3, (2004)
  • [3] Zhou Y., Chen Y., Ke H., Improvement of simplified procedure for liquefaction potential evaluation of sands by shear wave velocity, Chinese Journal of Rock Mechanics and Engineering, 24, 13, (2005)
  • [4] Chen G., Li F., Probabilistic estimation of sand liquefaction based on neural network model of radial basis function, Chinese Journal of Geotechnical Engineering, 28, 3, (2006)
  • [5] Cai G., Liu S., Tong L., Et al., Evaluation of liquefaction of sandy soils based on cone penetration test, Chinese Journal of Rock Mechanics and Engineering, 27, 5, (2008)
  • [6] Jin Z., Prediction of sand liquefaction based on distance discriminant analysis and its application, Chinese Journal of Geotechnical Engineering, 30, 5, (2008)
  • [7] Yan K., Liu N., Xia T., Discriminant analysis model for prediction of sand soil liquefaction during earthquake, Rock and Soil Mechanics, 30, 7, (2009)
  • [8] Liu Y., Extension clustering prediction method for evaluation of seismic liquefaction of saturated sandy soil, Rock and Soil Mechanics, 30, 7, (2009)
  • [9] Cao Z., Yuan X., Shear wave velocity based approach for evaluating gravel soils liquefaction, Chinese Journal of Rock Mechanics and Engineering, 29, 5, (2010)
  • [10] Liu N., Wang H., Yuan Z., Et al., Fisher discriminant analysis model of sand liquefaction and its application, Rock and Soil Mechanics, 33, 2, (2012)
12