Research on Simulation Algorithms for Two Dimensional Models of Space Charge Dynamics in High Voltage DC Cable Insulation

被引：0
|
作者：
Zhang Y. [1 ]
Liu D. [1 ]
Zhou G. [1 ]
Wu J. [1 ]
Yin Y. [1 ]
机构：
[1] School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University, Minhang District, Shanghai
来源：
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2019年 / 39卷 / 15期
基金：
中国国家自然科学基金;
关键词：
Bipolar charge transport model; Cable insulation; Finite element method (FEM); Finite volume method (FVM); Space charge; Two dimensional models;
D O I：
10.13334/j.0258-8013.pcsee.181127
中图分类号：
学科分类号：
摘要：
In order to simulate the space charge behavior in high voltage DC cable insulation, this paper proposed a simulation algorithm for space charge transport based on two dimensional unstructured mesh, which combined with bipolar charge transport model. The algorithm is based on iteratively solving the Poisson equation and charge conservation equation. The finite element method (FEM) is employed to solve the Poisson equation and the finite volume method (FVM) is employed discretizing the charge conservation equation on a cell-centered tessellation. In order to ensure the charge density in a reasonable range and in second-order accuracy, a linear reconstruction with limiter for charge density was adopted in the insulation domain. The comparison results of space charge simulation of 4mm-thick cable insulation in two dimension and measurement with a full-size space charge system based on pulsed electro-acoustic (PEA) method validate the accuracy and effectiveness of the proposed algorithm. The space charge simulation in two dimension shows that when the cable length is far outweigh that radius, the space charge uniformly distributed along the axial direction apart from both ends. Thus the space charge simulation could modeled in one dimension along radius in such condition. However, the space charge distribution differs obviously along the axial direction at both ends, which suggests the necessity to call for a two dimensional model for simulation of the charge behavior in cable insulation to improve the accuracy. © 2019 Chin. Soc. for Elec. Eng.
引用
收藏
页码：4615 / 4622
页数：7
相关论文
共 25 条
  • [11] Laurent C., Teyssedre G., Roy S.L., Et al., Charge dynamics and its energetic features in polymeric materials, IEEE Transactions on Dielectrics and Electrical Insulation, 20, 2, pp. 357-381, (2013)
  • [12] Alison J.M., Hill R.M., A model for bipolar charge transport, trapping and recombination in degassed crosslinked polyethene, Journal of Physics D: Applied Physics, 27, 6, pp. 1291-1299, (1994)
  • [13] Roy S.L., Teyssedre G., Laurent C., Charge transport and dissipative processes in insulating polymers: experiments and model, IEEE Transactions on Dielectrics and Electrical Insulation, 12, 4, pp. 644-654, (2005)
  • [14] Roy S.L., Teyssedre G., Laurent C., Modelling space charge in a cable geometry, IEEE Transactions on Dielectrics and Electrical Insulation, 23, 4, pp. 2361-2367, (2016)
  • [15] Chen G., Zhao J., Li S., Et al., Origin of thickness dependent dc electrical breakdown in dielectrics, Applied Physics Letters, 100, 22, (2012)
  • [16] Wu J., Charge transport investigation in low-density polyethylene/silica nanocomposite based on experiment and numerical simulation, (2012)
  • [17] Huang G., Ruan J., Du Z., Et al., Improved 3-D upwind FEM for solving ionized field of HVDC transmission lines, Proceedings of the CSEE, 33, 33, pp. 152-159, (2013)
  • [18] Cui X., Zhou X., Lu T., Recent progress in the calculation methods of ion flow field of HVDC transmission lines, Proceedings of the CSEE, 32, 36, pp. 130-141, (2012)
  • [19] Jin J., The Finite Element Method in Electromagnetics, pp. 79-102, (2014)
  • [20] Wang Y., Ma X., Qiu G., The application of the asymptotic boundary condition technique in the numerical analysis of axisymmetrical unbounded high-voltage static field, High Voltage Engineering, 1, pp. 26-30, (1997)
123