Effect of impact and flexural loading on hybrid composite made of kevlar and natural fibers

被引:1
|
作者
Thakare, P. A. [1 ]
Kumar, Neeraj [2 ]
Ugale, V. B. [1 ]
Giri, Jayant [3 ]
Sunheriya, Neeraj [3 ]
Al-Lohedan, Hamad A. [4 ]
机构
[1] Coll Mil Engn, Dept Mech Engn, Pune 411031, India
[2] Suresh Gyan Vihar Univ SGVU, Dept Mech Engn, Jaipur 302017, India
[3] Yeshwantrao Chavan Coll Engn, Dept Mech Engn, Nagpur 441110, India
[4] King Saud Univ, Coll Sci, Dept Chem, Riyadh 11451, Saudi Arabia
关键词
THIN SANDWICH PANELS; JUTE;
D O I
10.1063/5.0195907
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, four varieties of hybrid Fiber-Reinforced Polymer (FRP) panels made of kevlar-29 and natural fibers are studied. All panels have kevlar-29 face sheets and natural fiber core, such as jute, flax, sisal, and hemp. This research focuses on the behavior of these hybrid FRP panels under flexural and impact loading so that the panels can be explored for the structural/semi-structural members of army shelters, portable helipad, and roofing panels in high-altitude areas. Natural fibers are chemically treated with NaOH to improve hydrophobicity. The panels are vacuum bagged, the fiber volume fraction is 0.39, and the thickness is close to 4 mm. Three-point flexural loading using the universal testing machine and low-velocity impact loading up to 24 J under drop weight impact test setup is carried out to characterize the panels. Damage area, delamination, permanent deformation, indentation depth, energy absorbed, flexural strength, and modulus are measured. The hybrid flax/kevlar panel and hemp/kevlar panel, each resist impact with permanent deformation less than 0.5 mm up to 24 J. Without significant face sheet or core fiber breakage, the delamination is spread over a small radial distance of 18.5 and 24.5 mm, respectively. Interface matrix breakage causes delamination. The load vs deflection curve is almost linear under flexural loading, and specimens failed under compression at 240 MPa. The numerical simulation is also done using ANSYS and LS-DYNA for detailed study.
引用
收藏
页数:12
相关论文
共 50 条
  • [41] RESIDUAL FLEXURAL STRENGTH OF FRP COMPOSITE SPECIMENS SUBJECTED TO TRANSVERSE IMPACT LOADING
    ROTEM, A
    SAMPE JOURNAL, 1988, 24 (02) : 19 - 25
  • [42] Effect of length and content of steel fibers on the flexural and impact performance of self-compacting cementitious composite panels
    Kontoni, Denise-Penelope N.
    Jahangiri, Behnaz
    Dalvand, Ahmad
    Shokri-Rad, Mozafar
    ADVANCES IN CONCRETE CONSTRUCTION, 2023, 15 (01) : 23 - 39
  • [43] Effect of temperature on impact properties of hybrid fiberglass/Kevlar laminate composites
    Salehi-Khojin, Amin
    Bashirzadeh, Reza
    Mahinfalah, Mohammad
    Nakhaei-Jazar, Reza
    Proceedings of the ASME Applied Mechanics Division, 2005, 256 : 19 - 26
  • [44] Mechanical properties of a polyurethane hybrid composite with natural lignocellulosic fibers
    Otto, Guilherme Piovezan
    Moises, Murilo Pereira
    Carvalho, Gizilene
    Rinaldi, Andrelson Wellington
    Garcia, Juliana Carla
    Radovanovic, Eduardo
    Favaro, Silvia Luciana
    COMPOSITES PART B-ENGINEERING, 2017, 110 : 459 - 465
  • [45] Mechanical properties of natural fibers reinforced polyester hybrid composite
    Athijayarnani, A.
    Thiruchitrarnbalam, M.
    Manikandan, V.
    Pazhanivel, B.
    INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY, 2010, 14 (01) : 104 - 116
  • [46] Analysis of the Effect of Kevlar Fibers on Abrasion Resistance, Flexural Strength and Hydraulic Conductivity Coefficient of Silica Fume Concretes
    Rahmani, Kamal
    Piroti, Saber
    Ghameian, Mohsen
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2020, 44 (02) : 669 - 674
  • [47] Effect of interlayer hybridization of carbon, Kevlar, and glass fibers with oxidized polyacrylonitrile fibers on the mechanical behaviors of hybrid composites
    Ebrahimnezhad-Khaljiri, Hossein
    Eslami-Farsani, Reza
    Akbarzadeh, Ebrahim
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (09) : 1823 - 1835
  • [48] Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite
    Athijayamani, A.
    Thiruchitrambalam, M.
    Natarajan, U.
    Pazhanivel, B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2): : 344 - 353
  • [49] Experimental characterization of hybrid composite-to-metal bolted joints under flexural loading
    Kabche, Jean-Paul
    Caccese, Vincent
    Berube, Keith A.
    Bragg, Randy
    COMPOSITES PART B-ENGINEERING, 2007, 38 (01) : 66 - 78
  • [50] Flexural and impact properties of kenaf/glass hybrid composite metal laminates
    Feng, Ng Lin
    Subramaniam, Kathiravan
    Malingam, Sivakumar Dhar
    Bapokutty, Omar
    Sambu, M.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD), 2018, : 195 - 196