Position and stabilization control of inverted pendulum systems using sliding mode based control and observer

被引:0
|
作者
Heo J. [1 ]
Chwa D. [1 ]
机构
[1] Dept. of Electrical and Computer Engineering, Ajou University
关键词
Integral sliding mode observer; Inverted pendulum; Lyapunov stability; Sliding mode control; Tracking control;
D O I
10.5370/KIEE.2019.68.6.739
中图分类号
学科分类号
摘要
This paper proposes a position and stabilization control method for the inverted pendulum systems with disturbances such that an unstable equilibrium point is maintained and the position of the actuated body that can move freely is controlled. It is difficult to design the controller due to the dynamic coupling and nonlinear characteristics of the underactuated systems because the degree of freedom of the system is more than the number of the actuators. It is also a difficult problem to compensate for the disturbance. To solve this problem, we introduced an integral sliding mode based observer. Observer can be used to estimate and compensate for disturbance and system model errors, and state variables can also be estimated. Sliding mode controller for position and stabilization control is also proposed. Controller consists of the part that generates a reference value for the pendulum to move the actuated body to the desired position and the part that generates a control input to make the angle of the pendulum track the reference value. The stability of the overall pendulum systems using the proposed control schemes is provided and the feasibility of the proposed control methods is demonstrated through simulation results. Copyright The Korean Institute of Electrical Engineers
引用
收藏
页码:739 / 748
页数:9
相关论文
共 50 条
  • [41] Control for Underactuated Systems Using Sliding Mode Observer
    Zehar, Djamila
    Benmahammed, Khier
    Behih, Khalissa
    INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 2018, 16 (02) : 739 - 748
  • [42] Control for Underactuated Systems Using Sliding Mode Observer
    Djamila Zehar
    Khier Benmahammed
    Khalissa Behih
    International Journal of Control, Automation and Systems, 2018, 16 : 739 - 748
  • [43] Stabilization of Triple Furuta Pendulum by Sliding Mode Control
    Sugawara, Ken
    Izutsu, Masaki
    Hatakeyama, Shoshiro
    Iwase, Masami
    IECON 2014 - 40TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2014, : 2872 - 2877
  • [44] A linear-programming-based sliding-mode control design for stabilization of a double-inverted pendulum
    Yazici, A.
    Karamancioglu, A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 2006, 220 (I4) : 315 - 321
  • [45] Design and Implementation of Sliding Mode-State Feedback Control for Stabilization of Rotary Inverted Pendulum
    Anvar, Samira Mir Mazhari
    Hassanzadeh, Iraj
    Alizadeh, Ghasem
    INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS 2010), 2010, : 1952 - 1957
  • [46] Balance Control of an Inverted Pendulum System Using Second-Order Sliding Mode Control
    Rizal, Yusie
    Syu, Jhih-Wei
    Ho, Ming-Tzu
    2014 CACS INTERNATIONAL AUTOMATIC CONTROL CONFERENCE (CACS 2014), 2014, : 191 - 196
  • [47] Optimized Hierarchical Sliding Mode Control for the Swing-Up and Stabilization of a Rotary Inverted Pendulum
    Pham, Duc-Binh
    Dao, Quy-Thinh
    Nguyen, Thi-Van-Anh
    AUTOMATION, 2024, 5 (03): : 282 - 296
  • [48] Control of rotary double inverted pendulum system using LQR sliding surface based sliding mode controller
    Sanjeewa, Sondarangallage D. A.
    Parnichkun, Manukid
    JOURNAL OF CONTROL AND DECISION, 2022, 9 (01) : 89 - 101
  • [49] Sliding Mode Control of Double Inverted Pendulum Based on a Novel Approach Law
    Sun, L. F.
    Fu, C. Y.
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY AND MANAGEMENT SCIENCE (ITMS 2015), 2015, 34 : 1448 - 1451
  • [50] Decentralized Control for Stabilization of Coupled Pendulums using High gain Observer based Sliding Mode Control
    Raj, Sudhir
    2019 INTERNATIONAL CONFERENCE ON POWER ELECTRONICS, CONTROL AND AUTOMATION (ICPECA-2019), 2019, : 331 - 335