Process capabilities and future scope of Incremental Sheet Forming (ISF)

被引：6

作者：

Bhasker R.S. ^{[1
]}

Kumar Y. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, National Institute of Technology Patna, Bihar

来源：

Materials Today: Proceedings | 2023年 / 72卷

关键词：

FLD; Formability; Forming forces; Spring back;

D O I：

10.1016/j.matpr.2022.09.120

中图分类号：

学科分类号：

摘要：

The Incremental Sheet Forming process (ISF) is a versatile forming process that is widely used in various advanced manufacturing areas such as for making the skull prosthesis, automobile, electronics and aerospace components etc. In the present paper methods, chronology of ISF and its classifications have been discussed, considering the effect of various factors such as stress triaxiality, bending stress and fracture strain. In addition, the effect of process parameters and its interaction on forming force, formability, surface roughness, spring back, failure and fracture etc. are also studied. It is observed that the study of two degree of freedom manipulator of robot with ISF and its effect on the formability surface roughness are highly recommended. Also, a future scope of ISF is also included in this investigation. © 2022

引用

页码：1014 / 1019

页数：5

共 50 条

[31] Review on the influence of process parameters in incremental sheet forming
Gatea, Shakir
Ou, Hengan
McCartney, Graham
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 87 (1-4): : 479 - 499
[32] Incremental Sheet Forming
Elford, Michael
Saha, Pradip
Seong, Daeyong
Haque, Md Ziaul
Yoon, Jeong Whan
NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 2013, 1567 : 227 - 261
[33] Incremental sheet forming without die (dieless) as a feasible alternative to the conventional process of sheet forming
Paramo Bermudez, Gabriel
Benitez Lozano, Adrian
INGE CUC, 2013, 9 (01) : 115 - 128
[34] Preliminary results on Ti incremental sheet forming (ISF) of biomedical devices: Biocompatibility, surface finishing and treatment
Fiorentino, A.
Marzi, R.
Ceretti, E.
International Journal of Mechatronics and Manufacturing Systems, 2012, 5 (01) : 36 - 45
[35] Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming
Araghi, B. Taleb
Manco, G. L.
Bambach, M.
Hirt, G.
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) : 225 - 228
[36] On the Free-Surface Roughness in Incremental Forming of a Sheet Metal: A Study from the Perspective of ISF Strain, Surface Morphology, Post-Forming Properties, and Process Conditions
Al-Ghamdi, Khalid A.
Hussain, G.
METALS, 2019, 9 (05)
[37] Experimental Investigations on Forming Time in Negative Incremental Sheet Metal Forming Process
Sarraji, Wisam K. H.
Hussain, Jamal
Ren, Wei-Xin
MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (05) : 499 - 506
[38] EFFECTS OF FORMING TOOLS AND PROCESS PARAMETERS ON SURFACE ROUGHNESS IN INCREMENTAL SHEET FORMING
Khalil, Umair
Aziz, Muhammad Haris
Jahanzaib, Mirza
Ahmad, Wasim
Hussain, Salman
Hafeez, Faisal
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2018, 12 (03): : 75 - 95
[39] Numerical simulation and experimental investigation of incremental sheet forming process
韩飞
莫健华
JournalofCentralSouthUniversityofTechnology, 2008, (05) : 581 - 587
[40] Investigation of Advanced Robotized Polymer Sheet Incremental Forming Process
Ostasevicius, Vytautas
Eidukynas, Darius
Jurenas, Vytautas
Paleviciute, Ieva
Gudauskis, Marius
Grigaliunas, Valdas
SENSORS, 2021, 21 (22)

← 1 2 3 4 5 →