Dynamic modeling of the FAST cable-driven parallel robots

被引：0
|
作者：
Zhao Y. [1 ,2 ]
Wang Q. [1 ]
机构：
[1] National Astronomical Observatories, Chinese Academy of Sciences, Beijing
[2] University of Chinese Academy of Sciences, Beijing
来源：
Qinghua Daxue Xuebao/Journal of Tsinghua University | 2022年 / 62卷 / 11期
关键词：
cable-driven parallel robots; dynamics model; dynamics simulations; FAST; variable length flexible cable;
D O I：
10.16511/j.cnki.qhdxxb.2022.26.022
中图分类号：
学科分类号：
摘要：
The feed support system of the five-hundred-meter aperture spherical radio telescope (FAST) is a kind of giant cable-driven parallel robot that uses flexible cables to move the platform in the working space. Thus, the system combines variable length flexible cables and rigid body motion. This study analyzed the cable-driven parallel robot. The variable length cable elements were analyzed based on the absolute node coordinate method, the dynamic equations of the cable elements were then derived using the virtual work principle. Then, the dynamics of the rigid moving platform were analyzed, the dynamics equations of the cable-driven parallel robot with constraints between the cables and the moving platform were derived. Thus, the model included the degrees of freedom of the flexible cables and the platform. MATLAB was used for the simulations. The results compare well with measured data to verify the model feasibility. © 2022 Press of Tsinghua University. All rights reserved.
引用
收藏
页码：1772 / 1779
页数：7
相关论文
共 15 条
  • [11] FERRAVANTE V, RIVA E, TAGHAVI M, Et al., Dynamic analysis of high precision construction cable-driven parallel robots[J], Mechanism and Machine Theory, 135, pp. 54-64, (2019)
  • [12] QI Z H, CAO Y, WANG G., Model smoothing methods in numerical analysis of flexible multibody systems[J], Chinese Journal of Theoretical and Applied Mechanics, 50, 4, pp. 863-870, (2018)
  • [13] BERZERI M, SHABANA A A., Development of simple models for the elastic forces in the absolute nodal co-ordinate formulation, Journal of Sound and Vibration, 235, 4, pp. 539-565, (2000)
  • [14] WAGO T, KOBAYASHI N, SUGAWARA Y., Improvement on evaluating axial elastic force in Bernoulli-Euler beam based on the absolute nodal coordinate formulation by accurate mean axial strain measure, Proceedings of ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 963-970, (2011)
  • [15] YAO R, TANG X Q, LI T M, Et al., Analysis and design of 3T cable-driven parallel manipulator for the feedback's orientation of the large radio telescope[J], Chinese Journal of Mechanical Engineering, 43, 11, pp. 105-109, (2007)
12