Neural network modeling for face milling operation

被引：0
|
作者：
Sureshkumar B. [1 ]
Vijayan V. [1 ]
Dinesh S. [1 ]
Rajaguru K. [1 ]
机构：
[1] Dept. of Mech. Engg., K. Ramakrishnan College of Tech, Samayapuram, Tamil Nadu
来源：
International Journal of Vehicle Structures and Systems | 2019年 / 11卷 / 02期
关键词：
Cutting force; Feed force; Neural network; Surface roughness; Temperature; Thrust force;
D O I：
10.4273/ijvss.11.2.20
中图分类号：
学科分类号：
摘要：
Milling operation is one of the important manufacturing processes in production industry. Study and analysis of milling process parameters such as spindle speed, feed rate and depth of cut are important for process planning engineers. The responses are temperature, surface roughness, machining time, feed force, thrust force and cutting force. The main aim of this study is to find out the effects of these parameters in face milling operation on Monel k 400 work piece materials with tungsten carbide insert. The theoretical investigation is carried out with neural network modelling and the 3-1-6 structure neural network models are considered. Developed neural network models show best agreement with experimental values. For same type of operation, result of these experiments shall be useful for future research purpose. © 2019. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：214 / 219
页数：5
相关论文
共 50 条
  • [31] Prediction of surface roughness in duplex stainless steel face milling using artificial neural network
    Vasconcelos, Guilherme Augusto Vilas Boas
    Francisco, Matheus Brendon
    da Costa, Lucas Ribeiro Alves
    Ribeiro Junior, Ronny Francis
    Melo, Mirian de Lourdes Noronha Motta
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (5-6): : 2031 - 2048
  • [32] Assessment of machining features for tool condition monitoring in face milling using an artificial neural network
    Dutta, RK
    Kiran, G
    Paul, S
    Chattopadhyay, AB
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2000, 214 (07) : 535 - 546
  • [33] Modeling of methane oxidative coupling under periodic operation by neural network
    Abdolahi, F
    Mortazavi, Y
    Khodadadi, A
    Hudgins, RR
    Silveston, PL
    CHEMICAL ENGINEERING & TECHNOLOGY, 2005, 28 (05) : 581 - 586
  • [34] Online Monitoring of Tool Wear in Drilling and Milling Operation with Vibration Using Artificial Neural Network
    Kandilli, I.
    Soenmez, M.
    Ertunc, H. M.
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE VIBROENGINEERING 2008, 2008, : 63 - 67
  • [35] Modeling of interferences during thread milling operation
    Guillaume Fromentin
    Gérard Poulachon
    The International Journal of Advanced Manufacturing Technology, 2010, 49 : 41 - 51
  • [36] Modeling of interferences during thread milling operation
    Fromentin, Guillaume
    Poulachon, Gerard
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 49 (1-4): : 41 - 51
  • [37] Thermal conductivity reconstruction method with application in a face milling operation
    Boos, Everton
    Bazan, Fermin S. V.
    Luchesi, Vanda M.
    INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2023, 33 (08) : 3025 - 3055
  • [38] Neural network modeling for tool path planning of the rough cut in complex pocket milling
    Suh, SH
    Shin, YS
    JOURNAL OF MANUFACTURING SYSTEMS, 1996, 15 (05) : 295 - 304
  • [39] Neural network face detection
    Curran, K
    Li, X
    McCaughley, N
    IMAGING SCIENCE JOURNAL, 2005, 53 (02): : 105 - 115
  • [40] Modeling of the Thread Milling Operation in a Combined Thread/Drilling Operation: Thrilling
    Jun, Martin B. G.
    Araujo, Anna Carla
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2010, 132 (01): : 0145051 - 0145056
12345