Recent Development on Ultra-Low Firing Technologies of Microwave Dielectric Ceramics

被引：0
|
作者：
Li X. [1 ]
Xue X. [1 ]
Wang H. [1 ,2 ]
Guo J. [1 ]
机构：
[1] State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an
[2] Department of Materials Science and Engineering, Southern University of Science and Technology, Guangdong, Shenzhen
来源：
Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society | 2023年 / 51卷 / 04期
关键词：
ceramic; cold sintering process; low temperature co-fired ceramic; microwave dielectric; ultra-low sintering temperature technology; ultra-low temperature co-fired ceramic;
D O I：
10.14062/j.issn.0454-5648.20220700
中图分类号：
学科分类号：
摘要：
Microwave dielectric ceramics prepared via a conventional method usually require a high sintering temperature (i.e., >1 000 ℃) and long sintering time, leading to a high energy consumption and a difficulty to realize the integration and co-firing of multiple material system. Continuous innovation and development of wireless communication technology put forward higher requirements for the miniaturization and integration of microwave devices, so that some technologies for preparing low-temperature co-fired ceramic (LTCC) and ultralow-temperature co-fired ceramic (ULTCC) are developed. Developing green sintering technologies with lower sintering temperatures and higher sintering efficiencies becomes one of the research hotspots. Novel sintering technologies (i.e., liquid-phase sintering, hot press sintering, microwave sintering, spark plasma sintering, and flash sintering) promote the development of microwave dielectric ceramics. A novel ultra-low temperature sintering technology called cold sintering process is proposed. The sintering temperature of cold sintering process is rather low (≤300 ℃), which can densify ceramics in a short time, and has some advantages in the phase stability, co-firing of multiple materials and grain boundary manipulation, thus providing an opportunity for the development of ultra-low temperature sintering technology and microwave dielectric material system. © 2023 Chinese Ceramic Society. All rights reserved.
引用
收藏
页码：907 / 920
页数：13
相关论文
共 95 条
  • [1] SEBASTIAN M T, UBIC R, JANTUNEN H., Low-loss dielectric ceramic materials and their properties[J], Int Mater Rev, 60, 7, pp. 392-412, (2015)
  • [2] REANEY I M, IDDLES D., Microwave dielectric ceramics for resonators and filters in mobile phone networks[J], J Am Ceram Soc, 89, 7, pp. 2063-2072, (2006)
  • [3] MIRSANEH M, REANEY I M, HAN Y, Et al., Low sintering temperature high permittivity glass ceramic composites for dielectric loaded microwave antennas[J], Adv Appl Ceram, 110, 7, pp. 387-393, (2011)
  • [4] LIU B, HUANG Y H, BAFROOEI H B, Et al., Effects of structural transition on microwave dielectric properties of Sr<sub>3</sub>(Ti<sub>1–x</sub>Sn<sub>x</sub>)<sub>2</sub>O<sub>7</sub> ceramics[J], J Eur Ceram Soc, 39, 15, pp. 4794-4799, (2019)
  • [5] PIRVARAM A, TAHERI-NASSAJ E, TAGHIPOUR-ARMAKI H, Et al., Study on structure, microstructure and microwave dielectric characteristics of CaV<sub>2</sub>O<sub>6</sub> and (Ca<sub>0.95</sub>M<sub>0.05</sub>)V<sub>2</sub>O<sub>6</sub> (M=Zn, Ba) ceramics[J], J Am Ceram Soc, 102, 9, pp. 5213-5222, (2019)
  • [6] ZHANG X, FANG Z X, JIANG Y H, Et al., Microwave dielectric properties of a low firing and temperature stable lithium magnesium tungstate (Li<sub>4</sub>MgWO<sub>6</sub>) ceramic with a rock-salt variant structure[J], J Eur Ceram Soc, 41, 16, pp. 171-178, (2021)
  • [7] YANG H Y, ZHANG S R, YANG H C, Et al., Usage of P–V–L bond theory in studying the structural/property regulation of microwave dielectric ceramics: a review[J], Inorg Chem Front, 7, 23, pp. 4711-4753, (2020)
  • [8] GUO J, BAKER A L, GUO H Z, Et al., Cold sintering process: A new era for ceramic packaging and microwave device development[J], J Am Ceram Soc, 100, 2, pp. 669-677, (2017)
  • [9] VARGHESE J, SIPONKOSKI T, NELO M, Et al., Microwave dielectric properties of low-temperature sinterable alpha-MoO<sub>3</sub>[J], J Eur Ceram Soc, 38, 4, pp. 1541-1547, (2018)
  • [10] SEBASTIAN M T, WANG H, JANTUNEN H., Low temperature co-fired ceramics with ultra-low sintering temperature: A review[J], Curr Opin Solid State Mater Sci, 20, 3, pp. 151-170, (2016)
12345678910