Design and analysis of unequal aperture off-axis optical integrator for solar simulators

The unequal aperture off -axis optical integrator design method is proposed to improve the irradiation uniformity of solar simulators and solve the problem of limited uniformity of optical integrator due to aberrations and uneven distribution of incident radiation. Firstly, the unequal aperture off -axis optical integrator structure is designed based on the scalar diffraction theory to analyze the factors affecting the optical homogenization ability of the optical integrator. Then, the relationship between sub -eye lens aperture and arrangement is explored in combination with Lagrange invariance principle and semi -definite programming theory. Finally, the optimum off -axis amount of sub -eye lens with different ring band is determined from the perspective of geometric optics by using the aberration theory and following the principle of edge light, so as to improve the evenness of optical integrator. The design results are verified by the simulation analysis. The simulation results show that: In the picture plane of optical integrator, the irradiation non -uniformity in the 4) 26 mm irradiation plane is 14.87%, which is better than 26.02% in the traditional optical integrator. At the same time, at the effective irradiated surface, the irradiation non -uniformity of 0.53% within the 4) 300 mm reaches the irradiation standard of the class A + solar simulator, and the irradiance only decreases by 16.5% compared with the traditional optical integrator, which still meets the index requirement of a solar constant. The goal of improving the evenness of optical integrator is realized without greatly affecting irradiance and without introducing aspherical design.