Optimization of cutting speed and clearance angle in the disc chipper

被引：0
|
作者：
Reczulski M. [1 ]
机构：
[1] Lodz University of Technology, Centre of Papermaking and, Printing 223 Wólczańska St., Lodz
来源：
Wood Research | 2021年 / 65卷 / 06期
关键词：
Chip formation; Clearance angle; Cutting speed; Disc chipper; Wood chipping;
D O I：
10.37763/WR.1336-4561/65.6.951962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The wood chipping system in a disc chipper Carthage-Norman was studied. The study showed many operational problems related to obtaining chips of different length in the process of wood chipping. Excessive amount of fines and pin fractions were produced in the chipper. The reason for this was the too high cutting speed of the logs and the wrong clearance angle in the chipper. The actual and optimal distribution of the cutting velocity occurring on the chipper knife was determined using the Matlab/Simulink model. In addition, optimal clearance angles in the chipper were determined using the model. © 2020 Statny Drevarsky Vyskumny Ustav. All rights reserved.
引用
收藏
页码：951 / 962
页数：11
相关论文
共 50 条
  • [41] Cutting attitude inclination angle and rock-breaking mode characteristics of disc cutter
    Liu C.
    Cheng S.
    Liu Y.
    Xu P.
    Liu R.
    Hao X.
    Meitan Xuebao/Journal of the China Coal Society, 2024, 49 (02): : 1183 - 1198
  • [42] Evaluation and Optimization Method of High Speed Cutting Parameters Based on Cutting Process Simulation
    Wu, Zhijun
    Xu, Daochun
    Feng, Pingfa
    Yu, Dingwen
    Zhang, Chenglong
    INTELLIGENT ROBOTICS AND APPLICATIONS, PROCEEDINGS, 2009, 5928 : 317 - 325
  • [43] Optimization of the Laser Cutting Process in Relation to Maximum Cutting Speed Using Numerical Modelling
    Kheloufi, K.
    Amara, E. H.
    Benzaoui, A.
    LASERS IN ENGINEERING, 2017, 38 (3-6) : 127 - 136
  • [44] EFFECT OF THE DISC PROCESSING TECHNOLOGY ON THE VIBRATION LEVEL OF THE CHIPPER DURING OPERATIONS
    Krolczyk, Grzegorz M.
    Krolczyk, Jolanta B.
    Legutko, Stanislaw
    Hunjet, Anica
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2014, 21 (02): : 447 - 450
  • [45] STEREO DISC CUTTING
    GRUNDY, AB
    AUDIO, 1968, 52 (01): : 22 - &
  • [46] Optimization of the Cutting Conditions for High Speed Drilling of Woven Composites
    Meshreki, Mouhab
    Hamza, Karim
    Nassef, Ashraf O.
    Attia, Helmi
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 3A, 2014,
  • [47] Speed Optimization of Servo Motor in Optical Disc Systems Using Particle Swarm Optimization
    Pant, Millie
    Thangaraj, Radha
    Singh, V. P.
    2008 JOINT INTERNATIONAL CONFERENCE ON POWER SYSTEM TECHNOLOGY (POWERCON) AND IEEE POWER INDIA CONFERENCE, VOLS 1 AND 2, 2008, : 1124 - 1127
  • [48] Effects of cutting speed and feed per knife on size distribution of pulp chips produced by a chipper-canter from frozen and unfrozen logs
    Bourscheid, Cleide B.
    Hernandez, Roger E.
    Caceres, Claudia B.
    Blais, Carl
    WOOD MATERIAL SCIENCE & ENGINEERING, 2023, 18 (04) : 1179 - 1191
  • [49] Edge curve fitting and optimization of the wave-type cutting disc for castor
    Kong F.
    Wu T.
    Zhang B.
    Zhao H.
    Sun Y.
    Chen C.
    Xie Q.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2024, 40 (10): : 66 - 75
  • [50] The Structure Optimization Design of Cutting Disc of Defibrator Based on Monte Carlo Method
    Ma Hongbin
    Ma Yan
    Tan Guangyu
    Guo Xiurong
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 2064 - +
12345